Considering casting again after thirty plus years. Used to cast a .308 HP w/gas check using Lyman mold. Found Lyman 180 gr .452 mold (#452374). Suggestions about this or any other mold for 180-200 gr. .452 HP? Hope I put this in right spot.
Thanks
Considering casting again after thirty plus years. Used to cast a .308 HP w/gas check using Lyman mold. Found Lyman 180 gr .452 mold (#452374). Suggestions about this or any other mold for 180-200 gr. .452 HP? Hope I put this in right spot.
Thanks
The 452374 ( in solid form ) should weigh about 230 grs.
I just checked MidWay's website , the Devastator HP version of that mold ( 452374 ) does weigh 180 grs. according to MidWay's add.
http://www.midwayusa.com/product/670...r-hollow-point
Ben
Last edited by Ben; 04-10-2013 at 11:03 PM.
45HP - First, Welcome to the madness.... Second, Can't tell specifically what you are looking for in terms of advice. I can say that the 452374 is a VERY popular mold for the 45ACP. Like Ben said, generally 230 grains. There are numerous 200 grain molds available for the 45ACP also, most of them very good for accuracy. The most popular probably are the Lee 200 gr, the Lyman 452460 is very good and maybe the best is the H&G 68 200 gr and most of the available clones. We have some SUPER custom mold makers on this site. They can be found in the Vendor/Sponsor section.
enjoy your search. Mike Whoops ~!!! Just noticed you were looking for a HP design. Again, the custom makers will fix you right up with one of those. I think the only one commercially available is the Lyman Devastator.
Politicians are a lot like diapers. They should be changed frequently, and for the same reason. Benjamin Franklin
MP molds makes a 452 200gr HP mold that is viciously accurate. 5.3gr of 231 and this bullet will shoot better than you can all day long in a 1911.
I am sorry but I do not know MP, I am guessing it a manufacture. Also the Lyman #452374 can also be a 230gr. RN in a double cavity. Saw some on Ebay, the mould had that number on it. Email Lyman about this but as of yet have not heard back.
Found Hollow Point Bullet Mold Service who will make any mold from yours I guess into a hollow point. They have three in stock (160,200,and 230 gr.) base on Lee moulds. I have never used an aluminum mould so I am a little nervous about them, since I can not find the alloy used in the mold.
If I can get the name of MP or there URL, I will take a look at them.
By the way is it MOLD or MOULD?
Thanks for responses,
Bill
Just found MP-Mold website
I'm looking at NOE 230gr. 45acp
It looks like the Mihec .45 200g Cramer HP is now the MP 452 200gr HP. I am still waiting from MP-Mold on the alloy used to make the mold (mould). If it is indeed a copper alloy such as brass then I am going to buy it. By the way spell checkers give mold for mould.
Quality!
Last edited by Three-Fifty-Seven; 06-22-2020 at 11:14 AM.
John 3: 16 For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.
I have the MP mould for the 200 gr H.P. It is a DANDY. If you cast it of the appropriate alloy, it will expand to .80 caliber (read the results complete with pictures):
http://castboolits.gunloads.com/show...-HP-great-mold
http://castboolits.gunloads.com/show...-4-cavity-mold
Dale53
aluminum molds are quite nice to work with
but i would like to have a brass one someday
Last edited by dudits; 04-14-2013 at 04:05 AM.
FEAR YOUR GOVERNMENT
“The duty of a patriot is to protect his country from its government.” - Thomas Paine
Thanks all. I've going to purchase the MP 200 gr. HP
Dale53, what alloy do you suggest?
This is one of my favorites ! You might contact Al at NOE and see if there are any available.
http://castboolits.gunloads.com/show...highlight=45BD
Jerry
S&W .38/44 Outdoorsman Accumulator
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |