As many of you may remember I purchased an 03-A3 a while ago that was in probably an old Herter's stock. It looked like this:
I purchased a C stock from CPM. Yes, I know, but the manual says these were optional. It was an apparent drop in fit. I say apparent because I have never held one and do not know if it is supposed to fill the hand quite as much as it does. Anyway, it was drop in inletted and sealed. After six coats of tung oil this is what she looks like:
I'm waiting on one bolt. I need to get a 3/32 drill bit and run it though the hole for the nose piece. Then put that bolt in. She will be finished. Then to get to the range!
Mike, one of the range masters, has already claimed shooting privileges!