Hey guys. I'm seriously considering purchasing a Star sizer with the air feed and heater. I've been trying to puzzle out the heater situation. I'm planning on running hard lube since it gets pretty hot here, which means I'll need a heater. Does the Magma heater have a temperature control? From what I understand, the Lyman heaters do not have any type of temperature control.
I've seen some posts where some people have rigged up a PID so they can control the temperature. That may be the best route to go, it'll just mean more money into Star sizer project. If I was to go the PID route, would it make much difference if I went with the Lyman vs the Magma heater? I'm wanting as trouble free of an operation as I can put together here, which is why I decided to go with the air feed to start.
Thank you for any advice you can offer. I hope I didn't miss any obvious threads.