Anyone have a Lee on size fits most decaping die they don't need? Let me know please.
Anyone have a Lee on size fits most decaping die they don't need? Let me know please.
Sorry that's one of the things I just don't see not having a need for, however if by chance you can't find one here, try here:
http://www.midsouthshooterssupply.co...sku=0000690292
BTW, welcome to Cast Boolits!
GSSF RSO
NRA RSO
DU
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
These are the times that try men's souls.
Thomas Payne
Several websites have them. Went to Cabelas today and they don't have anything. Just seeing if anyone had one they don't need.
Welcome to the forum PK.-edit- should be hunting270
Try Titan at the banner at the top of the page.
support our sponsors
Oops! sorry PK, I did not scroll up far enough to check for the name for the welcome.
Last edited by LUBEDUDE; 01-28-2013 at 07:38 PM. Reason: correct snafu
TEAM HOLLYWOOD
NRA- LIFE TSRA-LIFE SASS-LIFE
Thanks, I am, Lee Precision. http://leeprecision.com/search.php?mode=search&page=1 Please note the status of the items on hand.
Regards,
GSSF RSO
NRA RSO
DU
"People sleep peaceably in their beds at night only because rough men stand ready to do violence on their behalf."
George Orwell
These are the times that try men's souls.
Thomas Payne
Or look into the Harvey hand held deprimer..
My recommendation is to avoid the Lyman universal de-primer. They seem to average about six cases before the pin snaps. Mine made it to ten.. They said replacement pins are only $3.95 and most folks order two..
I have a lee and a Harvey I use the Harvey the most on range stuff.
OOPs I forgot I have a broken Lyman as well. They do not replace the pins for free even if it breaks in the first ten cases.
Go here to read about The Harvey.
http://castboolits.gunloads.com/show...arvey-Deprimer
Last edited by oldtoolsniper; 01-22-2013 at 11:18 AM.
“Work hard! Millions on welfare depend on it!”
Wouldn't trade my lee!
1Shirt1
"Common Sense Is An Uncommon Virtue" Ben Franklin
"Ve got too soon old and too late smart" Pa.Dutch Saying
Nice thing about the lee is the pin will push up rather than break in most cases. Whatever route you take get an extra pin because it you don't it will break and you will be waiting for a new one. This includes the Lee and the Harvey I have broke them both too.
“Work hard! Millions on welfare depend on it!”
Just bought my Lee universal deprimer from Amazon and the seller shipped immediately from Florida
If you're doing any Military/Law Enforcement crimped at all make sure you get an extra pin.
“Work hard! Millions on welfare depend on it!”
I find my RCBS universal decapper very useful to decap dirty range brass prior to putting them in my polisher. Don't have to worry about lead in the dust that way.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
Found one on ebay.
Me neither.
Thing is, I don't use it (Lee de-capper) all the time, but no way would I sell it or give it away. I also have a (Lee) hand set that has the base and a decapper rod that you use a mallet and whack the spent primer out with. I use that for stubborn or really stubborn LE/mil-crimped brass.
I gave well under $10 for that Lee de-capper a while back and it was a great investment.
Yep. I've never broken a Lee de-capper and that is one reason why I like Lee full-length resizing dies so well. On the odd occasion where I run into crimped or berdan primed brass, the decapping pin simply slides up in the compression nut rather than breaking.
I've known reloaders who have broken them, however, because they torqued that compression nut down so tight so it WOULDN'T slide up--which defeats the entire purpose of the design.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |