This thread really inspired me to try something. My wife has something called embossing ink actually its like an adhesive that is transfered to card stock then powder paint is sprinkled on and then heated to leave a raised design. Well I decided to roll some bullets on the pad then picked them up with tweezers by the lube grove and dip them in the powder coat. Then I set them nose down in a metal lid I drilled holes in then baked at 350 for 20 min. White bullets were the result. They started out unsized about .311 after I sized to .309 with ease. I'm going to load them in 30 herrett cases and see what happens