I have a large frame double action 32. Great little pocket pistol. But, it has a small problem. In single action mode where I pull hammer back to lock up the action works fine. The hammer travels a greater distance and hits the firing pin fine and the firing pin hits the primer fine. The bullet is then fired.
If I use the gun in double action the hammer does not travel as far and does not hit the firing pin hard enough to set of the primer. The gun is in really great shape and shoots dead on. I have taken the gun apart and cleaned the gun and debured all parts and really smoothed the gun up.
My question is how can I increase the throwof the hammer in double action mode to get a harder strike on the firing pin?
Thanks for thinking about it.
Deacon Stone