Have been casting .40 S&P and 9mm for two session on separate days and towards the end of today's session the bottom tip/spout of my Lee Pro 4 pot would seemingly cool off and no longer pour. I upped the temp of the pot and this didn't seem to make any diff. I have to reheat the tip/spout almost every pour with a small propane torch that I have. This is just no working...
I tried cleaning out the tip/spout a number of times, didn't work. Then I emptied the pot, took the bottom plate off, and drilled out the hole in the tip/spout. This didn't work either.... I still had to use the torch to heat the tip just a bit to get the pot to pour again...
Anyone have any idea why the tip is seemingly cooling off so quickly and stays clogged?
Thanks... Rick