I just got my first 40 cal. Glock 27. I wanted a 9mm but oh well. Anyway, how do you all like your BT One Step Die?
I just got my first 40 cal. Glock 27. I wanted a 9mm but oh well. Anyway, how do you all like your BT One Step Die?
"Consequently we move away from other shooters to remain focused on our passion, as our ideas are quickly dismissed or misunderstood by others. Sharing does not come easily for swagers, not because they are necessarily selfish, but because they have been whittling away in their only little world for so long, that being able to relate to others what they understand is no simple task."
Mentor
don't have a 40,or the die.
but his 44 works right well, i have one of the first ones brian done and it has done a couple of thousand bullets so far.
it has also made a few hundred cast hollowpoints,changed the nose shape on a few hundred more.
made a bunch of 375's into 44 gas check flat points too.
Like RFR - I don't have a .40, but do use the One Step dies for a .44. Haven't had any issues with these dies and am getting pretty good accuracy out of a TC Contender. 2.5 inch 100 yd groups which would likely get smaller with better optics.
Do both u guys use a one step 44? jackets made from 40 brass?
Get it. It works perfect and is super easy. I run these bullets in 4 different Glocks, and never had any issue. Even with the tighter Lone Wolf barrels they work great.
I have BOTh the .40 cal set and the 44 mag set from Brian. They BOTH work perfectly, and I have made many thousands of nice bullets with them.
The key to success with the .40 S&W is to use:
- Either 380 auto brass, or 9mm Luger brass trimmed down to 380 auto length (.680")
- A cast bullet core, preferably one in the 100-105 grain weight, which is also the size and weight for the 380 auto.
- The result will be a 165 grain Hollow Point, which is the ideal go-to bullet weight for the .40 S&W.
I use the load data from the Hornady book for 165 grain HP bullets (XTP)
I trim the length on the 9mm luger brass using a modified RCBS Trim Pro trimmer.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
i have the one step but use the core seat die also.
like i said it's an early one.
brian, made the xtp jacket thingy [notch die?] by hand.
i can cut the jacket to preprogram the opening of the bullet and still flat nose them.
so he ain't getting it back
Duke, what would you come up with if you did not trim the 9mm case? I am wondering if I am only shooting for fun, targets.
I used untrimmed, deprimed brass and a 105 core and got 165's. They were also the best looking bullets. The only down side was that my 105 mold was for Makarov so I had to down the cores before seating them. Also, it was a 2 hole mold instead of 6.
If you notice khamill2000's image, you will see some brass that comes past the top of the lead in the nose of his bullets. My trimming eliminates that brass sticking out. When you're making hollow points, you want the nose to expand outwards. If you leave that brass exposed, and the brass gets pushed inwards, it will captivate the lead, and keep the nose from expanding. At least that is what I am expecting. Haven't tested my theory.
By trimming, or just using 380 auto brass, it eliminates that brass stick out. My lead cores, after swaging, go right to the tip of the nose.
My best friend just bought a sub compact 380 auto pistol, and so I am supplying him with reloading brass. At some point, he will have enough, and I can then just start using that brass, instead of trimming,.
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
Author of a book on reloading
ILSA MEMBER http://www.internationallawnsteelsho...ssociation.com
NRA RANGE SAFETY OFFICER
I need me one of them lone wolf barrels to shoot 9mm through my G27. Everyone seems to be sold out.
Anyway. Once I get some cash I do think that one of these dies are on my list. I was sold on them anyway. Just wanted to hear what everyone that has one thought of it.
"Consequently we move away from other shooters to remain focused on our passion, as our ideas are quickly dismissed or misunderstood by others. Sharing does not come easily for swagers, not because they are necessarily selfish, but because they have been whittling away in their only little world for so long, that being able to relate to others what they understand is no simple task."
Mentor
I have all 3 barrels for my G23 (40, 357, and 9) and all work great
Well I don't suppose you need my opinion (Smile)
I was making the 40's before I even had a gun to shoot them in. When I discovered just how easy it was I bough a 40 S&W pistol and didn't look back.
Here is the current standard offer I send everyone interested in the 40 cal one step die.
I have several ready to ship in both the improved CH version and my own design.
Good shooting
BT
The 40 cal bullets made from 9mm brass is by far my favorite bullet to make and shoot. It is incredibly easy, and by far the cheapest, to make and shoot of any bullet. One stroke in the press and you have a perfect 180 grain bullet that rivals anything available on the market. Load it up with as little as 5 grains of powder and you are shooting 40 S&W cheaper then 22LR! This is the swage die I recommend to everyone and anyone that is just getting into swaging. For very little intial investment you will be shooting your own bullets in the least amount of time with the least amount of effort.
I just put the final touches on a dozen of my improved CH 40 cal one step dies. If you are looking for one of my BTSniper custom 40 cal dies I have severial of those to offer as well.
I now offer the one step die with my universal die and expanding/case prep mandrel as standard issue. I feel this universal die and mandrel is necessary to achieve the best results and as such I now offer them as a set. Should you not wish to purchase this addition universal die and expanding mandrel remove $75 from total bill.
Cost and options is as follows,
$300 CH improved 40 cal one step die including case prep/expanding mandrel and universial die
$350 BTSniper 40 cal one step die including case prep/expanding mandrel and universial die
Recomended options,
$100 XTP notch insert for use with universal die
$10 S&H
Here is a look at my universal XTP notch die and case prep sizing mandrels.
Here is a look at the Ch version bullets made in my improved CH swage die next to a similar commercial offering.
Here is a look at my custom BTSniper bullets made in my custom die next to similar commercial offering
here is the two bullets I offer side by side,
notched!
no XTP notch
I supply everything you need to get started. The XTP notch insert works slick and makes an incredible 40 cal bullet that rivals any of the comercial offereings in my opinion.
With either one of the dies I have to offer you will be able to make yourself a life time supply of nearly free bullets.
If you ever have any questions please feel free to let me know, I am always happy to help. I am positive you will be very happy with either die you chose and I back it up with life time warranty as well as 30 day money back if your not happy.
I will be happy to accept personal check, money order or Paypal. If using PayPal please add their %4 fee to total bill.
I look foward to hearing back from you and getting you one of these great die set ups.
Good shooting and Swage On,
BT
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
Just curious .... would a Lee Classic Cast turret , the cast iron machine work with this set up ?
digger
I wouldn't do it to much flex in the turret (I have same turret press). There is to much pressure required to form the bullet for any turret press. Get a good cast single stage press and have it.
"Life isn't like a box of chocolates...It's more like
a jar of jalapenos. What you do today, might burn
your ass tomorrow."
BTX Star Crimp Die
Back in stock with new low price!
Click link below!
http://castboolits.gunloads.com/show...Star-Crimp-Die
also check in and say hello on my new face book page!
https://www.facebook.com/BTSniper-153949954674572/
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |