I looked in the Stickies and didn't find much on the LEE other than "Drip".
My pot all of a sudden won't get hot enough to melt the lead. I put it on setting
"8"(800) and the hottest it will get is about 3.5 (350 deg.) according to where the thermostat makes and breaks. The two elements on the thermostat that touch and the - heat sensitive wire - ? stay in contact all the time as it should untill it reaches the correct set temperature, I assume. The heating element draws about 6 amps. I have it apart and ohmed out the heating element at 28 ohms
Any of you fellows been down this road ?.