Promised I would get some pictures of this. Took a little bit of figuring to get it to work with the standard punches (shell holder style) and the modified punches (screw in). This is what I am going to offer for sale so far.
1. U.P. North Swage and Reloading Press. Makes swaging less of a chore and with fine Precision.
2. The Auto-Ejector System. Eject the Swaged projectile on the down stroke. This will work with the rockchucker press and other presses with a 1" ram.
3. Conversion Kit for CH-4D dies. Works with the factory stock dies(shell holder style punches) and the modified ones(threaded punches).
4. Both the Standard and Screw in Punches. These will be offered two ways (your choice), but both will me made of tool steel.
Unhardened-
Hardened -
5. Adjustable Core Molds [B]
6. I am also now making Jacket Trim Dies
Can also build them to trim your cartridge case jackets.
Here is a link to the vendor sponsor section with pictures and a description. http://castboolits.gunloads.com/show...58#post2149358
CURRENT UPDATED PRICES CAN BE FOUND IN THE VENDOR SPONSOR SECTION.
Here is the link http://castboolits.gunloads.com/foru...ls-and-Presses