Bob in TX wanted a Kake Cutter for .358 " sized cast bullets using the pan lubing process .I made him one and will be shipping it to him today.
Thought you might like to see it . It is made out of a fired 35 Ack, 40 degree, improved, Whelen cartridge case. Fits the .358 " cast bullet " SNUG ".
It has a piece of 80 grit sand paper glued to the outside of the case to prevent your hand from slipping while using the tool and to aid in being able to remove the bullet from the solidified lube. The cutter has an ejector pin also for easy removal of the bullets when they are cut out of the solidified lube.
If a person plans on not buying a lube sizer, they would need a Lee Sizing die , here it is :
http://www.midwayusa.com/viewProduct...tNumber=685087
Then , get yourself some lube, & you're " In Business ! ! " with respect to sizing and lubing your own cast bullets.
If you'd like to read more about pan lubing , take a look at the next link :
http://castboolits.gunloads.com/showthread.php?t=119056
Thanks,
Ben