WOW does that stuff work! Made my molds start working like a champ!
WOW does that stuff work! Made my molds start working like a champ!
It is great stuff. It is one of those products that does what is claimed it will do better than any other product in it's class, and at a modest price to boot. Can't imagine casting w/o it anymore.
Modest price? You mean you can buy it all by itself? I just bought a small bottle of it for around $85, but got a real nice NOE mould for free with the purchase. Modest price? I'd say it was a steal.
We pretty consistently try to tell people about Bull Plate Lube, and I think about 50% or
more think it is all BS and hype and never try it out. Their loss.
Bill
If it was easy, anybody could do it.
I bought a couple bottle's 2 ear's ago and you can't tell I've even opened them,I use that little.
I was only going to get 1 but figured when I knock one over at least I'll have a spare one handy.
one ya try it ya gotta say *** (way to fine)
Hit em'hard
hit em'often
"The people never give up their freedom . . . Except under some delusion." Edmund Burke
"Let us remember that if we suffer tamely a lawless attack on our liberty, we encourage it." Samuel Adams
NRA Benefactor Life Member
CRPA Life Member
Rick where did you get that bottle I've been looking for one like that.
Bullplate is one of those things that you really just don't know what you are missing until you try it, and then you wonder how you ever got by without it. I traded The Bullshop some raw wheelweights for 10 bottles of it just so I would never run out. I may have overdone it as I have only used 2 bottles of it in the last4 years and I cast a few thousand bullets a week. It really does go a long way. If you haven't bought any yet you should invest the 3 or so dollars on it. At least that way you can say you tired it and don't like it, except you won't say that after using it!
From the reloading store at the local range. I bought one to try and really liked it so I went back and bought them out. I put several different things besides Bullplate in them and then used the few I had left as little tokens of "thanks" for a few people.
Should you find yourself one do yourself a favor and DO NOT put bore cleaner in these. Bore cleaner does exactly as promised, disolves brass. Don't ask how I know.
Rick
"The people never give up their freedom . . . Except under some delusion." Edmund Burke
"Let us remember that if we suffer tamely a lawless attack on our liberty, we encourage it." Samuel Adams
NRA Benefactor Life Member
CRPA Life Member
cbrick- you sure end a lot of your post with.Dont ask how i know.
Please list all the reasons you have for saying that and save us from ourselves.
That's easy, because I was foolish enough to try it, all the trials, mistakes, ah sh*t's, try something else. 30 years of that and there are a lot of things that I know that don't work. Lot's of things that I can advise not to do like lino on steel targets, been there, done that . . . Don't work too good. Or bore cleaner in a brass container, not too smart but I can tell you from experience, not a good idea.
Besides, that's only the second or third time in the last several weeks that I've said that.
Rick
"The people never give up their freedom . . . Except under some delusion." Edmund Burke
"Let us remember that if we suffer tamely a lawless attack on our liberty, we encourage it." Samuel Adams
NRA Benefactor Life Member
CRPA Life Member
mix with beeswax and you have a great lube!
After reading how many folks have spilled their Bull Plate lube. I took a Forstner bit about the same size as the bottle, drilled a hole half way thru a 2x4 about 6 inches long and glued it into the hole. Now if I need some I use a Q-tip and i don't get any spills. ( Now watch I'll knock over the bloody 2x4 and spill the whole thing ) !!!
Jack
When the government fears the people, there is liberty. When the people fear the government, there is tyranny.
“The democracy will cease to exist when you take away from those who are willing to work and give to those who would not.
Thomas Jefferson was one Smart guy. Now we need to find another one!!!
NRA Life member since 1971, SASS
Ret. IAFF Local 2928
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |