This may be a stupid question but, When useing a Star luber sizer. Does one bullet nose push the prevous bullet out of the sizing die or does each bullet pass all the way through the machine on each cycle?
BK
This may be a stupid question but, When useing a Star luber sizer. Does one bullet nose push the prevous bullet out of the sizing die or does each bullet pass all the way through the machine on each cycle?
BK
place one bullet in and the second one will push the first out.
After the first bullet is pushed out by the second, each seceding bullet pushes the one ahead of it out of the sizing die. The final bullet stays in the die unless pushed out using the parts from the die extractor tool.
Thank you both for the info.
click on pdf manual, all you ever wanted to know about Star Lubrisizers.
http://www.magmaengineering.com/
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |