i was thinking about making a wood pistol grip for my
870
1 should the grain be going up and down or just like a stock side to side
i was thinking about making a wood pistol grip for my
870
1 should the grain be going up and down or just like a stock side to side
First thing to do, is check if it is legal where you are to have a pistol grip on a shotgun.
The solid soft lead bullet is undoubtably the best and most satisfactory expanding bullet that has ever been designed. It invariably mushrooms perfectly, and never breaks up. With the metal base that is essential for velocities of 2000 f.s. and upwards to protect the naked base, these metal-based soft lead bullets are splendid.
John Taylor - "African Rifles and Cartridges"
Forget everything you know about loading jacketed bullets. This is a whole new ball game!
Honestly if I were doing it, I'd do a laminate. It doesn't have to be anything special, but you could glue up 3 layers or so crisscrossing the grain, and then maybe dowel it with some brass pins if you want some bling to look at. OR use wooden dowels thoughtfully done inside blind holes so they can't be seen.
I'm sure a solid piece of quality wood might hold, but that's a nasty thought should the thing break.
how about some thing like this
http://operatorchan.org/k/arch/src/k...20inch%20(.jpg
The second thing to do is ask yourself why you'd want one. The only reason we had pistol grips or folding stocks on team shotguns was on the short-barreled breaching guns, because they're all but useless for any other purpose.
In the real world, if you need to fight with a shotgun, you need a full stock.
Most people would sooner die than think, in fact, they do so. -B. Russell
Geraldo, that's absolutely true. Three points of contact.
Short-barreled, manually-operated shotguns (non-semi-automatics) are non-restricted as long as the barrel remains unmodified from the original factory length. There is no legal minimum for shotgun barrels as long as the overall length exceeds 26" and so shotguns with barrels as short as 6.5 inches are available in Canada. If a shotgun with an 18-inch or greater barrel is reduced to below 18 inches by sawing, cutting, or replacing the barrel (by anyone other than a recognized gun manufacturer), that shotgun becomes prohibited.[4]
lol as long as a gun comes from the factory with the barrel as short as 6.5" its ok
ok im liking it here now.
replacing the barrel lol then how come i can have my 12.5 barrel(made by Dominion Arms) on my 870 *****
Last edited by camerl2009; 01-03-2011 at 11:14 PM.
If u have the DA12" shorty, you should have the p-grip with it when u bought it. Canada ammo who imported them http://www.canadaammo.com/product.ph...0&cat=0&page=1 I see they just got in some wood stocked ones and ur probably best to just to laminate one like what 'dean' said or cut one out of a scrap of oak and stain it.
I have shot a 8.5" barreled model and what that needs is a Kgrip of sort, to control the muzzle during recoil. even with trap loads.
I made a pistol grip for a friends 870. I laminated 3 pcs of oak rough cut to shape and hand finished to fit his hand.
I suggest you borrow one and try it out. I have seen several people try to use
one and miss EVERY man sized silhouette at 10 yds, every time. It was AMAZING
how useless it made the gun. Never shot one myself, but we nearly died laughing
at the guy trying to hit bit targets up close with it. He was not a complete idiot,
either. Well, actually - the second time I saw one used, the effect was identical,
but the shooter was pretty much a dud.
Bill
If it was easy, anybody could do it.
Interesting, I saw a guy with a pistol grip 12ga knocking clay pidgeons out of the air on a regular basis. Course, he is a SEAL and gets plenty of practice.
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
Here's a picture I copied from another board, which will remain unidentified to protect the idio... er, innocent.
He said he tried to put the stock back together after he tried to make a PGO!
His second photo, not copied, showed the "Repair" wrapped with what looked like masking tape.
Maybe he was just joking. But in all seriousness, I tried to show him how he could repair that mangled stock by inserting hardwood dowels (white lines) and wood screws (colored lines), and glue it together with a good wood glue.
Mark
Last edited by markinalpine; 04-23-2011 at 03:31 PM.
Any way you sell it,
No matter how you spell it,
When you start to smell it,
BO Stinks!
after all that effort, I would say get a new stock. Of course if it had been a rare stock/hard to find gun then he probly should be hit several times with the remaining pieces.
Staples!!!!!..........
Few shooters can be really effective with just the pistol grip on a shotgun. A good option is a stock with a pistol grip. I did try the pistol grip only. I took it to the range and tried everything from bird shot to 00 buck. I ruled it out for use on a defensive weapon. The stock w/ the pistol grip was very effective and if you needed to shorten up the weapon for confined spaces, just tuck the stock under your arm and you still have control of the shotgun.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |