I was watching a gun related tv show yesterday (I forgot the name).
It showcased RCBS and showed how they make presses and dies. They said RCBS Makes Dies for another reloading company that uses differnt colored boxes.
WHO COULD IT BE??
I was watching a gun related tv show yesterday (I forgot the name).
It showcased RCBS and showed how they make presses and dies. They said RCBS Makes Dies for another reloading company that uses differnt colored boxes.
WHO COULD IT BE??
NRA LIFER .. "THE CAST BULLET HANDLOADER IS THE ONLY ONE THAT REALLY MAKES ANY OF HIS AMMUNITION. OTHERS MEARLY ASSEMBLE IT". -E.H. HARRISON
----------------------
"Those who hammer their guns into plows will plow for those who do not."
Thomas Jefferson
------
"Government is not a solution to our problem, government is the problem."
-- Ronald Reagan
I've seen that before (Shooting USA) and thought "who"....
God Bless America
US Army, NRA Patron, TSRA Life
SASS, Ruger & Marlin accumulator
First, what color boxes? RCBS has dies in green and gray boxes.
But if they are making dies for another company that shouldn't surprise anyone. The name on the tools in your toolbox may not be the company that made them, and I guarantee you that not all of the current makers of 1911s are making frames, slides, internal parts.
Most people would sooner die than think, in fact, they do so. -B. Russell
Last I heard both Ruger and S&W were making golf club heads for a variety of companies because they have the investment casting setups. I suspect this is the same kind of situation, once you invest in the major hardware to do a job, it makes sense to make as many of as many different parts as the system can to leverage your investment.
Reloading Data Project - (in retirement)
http://sourceforge.net/projects/reloadersrfrnce/
Ruger's metal casting company is (or was) called Pine Tree Casting. They did but no longer make golf clubs. Don't know about S&W.
RCBS makes dies for Huntington Die Specialties.
There it is! I knew someone would know!! Thanks!!
NRA LIFER .. "THE CAST BULLET HANDLOADER IS THE ONLY ONE THAT REALLY MAKES ANY OF HIS AMMUNITION. OTHERS MEARLY ASSEMBLE IT". -E.H. HARRISON
----------------------
"Those who hammer their guns into plows will plow for those who do not."
Thomas Jefferson
------
"Government is not a solution to our problem, government is the problem."
-- Ronald Reagan
Is it a coincidence that RCBS and Lyman's bullet sizers use the same top punches and sizer dies for many years now? It makes one wonder how much of the other loading related equipment on the market is made by who....and where? LLS
most all electronic scales are made by pact.
i get a bit of a laugh when the rcbs and lyman electronic powder dumps are compared.
they have a couple of different features but the electronics are basically the same.
b.t.w i use the lyman dpms it's fast enough.
"The people never give up their freedom . . . Except under some delusion." Edmund Burke
"Let us remember that if we suffer tamely a lawless attack on our liberty, we encourage it." Samuel Adams
NRA Benefactor Life Member
CRPA Life Member
I think that they are the ones producing Hornady Dies.
If you are going to make a hole in something. MAKE IT A BIG ONE!
Have you noticed the the Hornady 50BMG press is pretty identical to the RCBS single stage AmmoMaster?
Visit my projects at: http://cheese1566gunsandstuff.shutterfly.com/
Hmmmmm.... all presses bolt to the bench, have a big threaded hole in the top and a handle. Must be only one maker, huh?
Like with most other products the name on the box
or brand name is not always the name of the company that produced it. Same in the shooting sports that doesn't make dies RCBS just because they make them . What I'm trying to say is that RCBS may manufacture the die set but they manufacture it to another company's specification or dimensions nothing wrong with that .That saves money for the company having them made because they have a set cost and don't need to buy materials or machinery to manufacture their products /dies in this case .It makes RCBS able to buy larger orders of raw materials that saves them money and set up time by having larger runs on their machinery. Bottom line it saves the end user money .Most 45 1911 frames are made in the Philippines buy http://www.armscor.com.ph
but made to different specifications for different manufactures. Same with Italian shotguns since The Beretta company in (Brescia, Italy has the only casting foundry in that ares they cast the receivers for company like Perazzi Shotguns and a dozen or more others again to their specifications .
Not all, but these two!
Right down to the slot on the left for the AkroBin holder. Only difference is the front name plate on the base. RCBS is cast in, Hornady is the usual foil decal...
Attachment 31729 Attachment 31730
Last edited by cheese1566; 06-08-2012 at 09:33 AM.
Visit my projects at: http://cheese1566gunsandstuff.shutterfly.com/
i know RCBS now uses Chinese rough castings for their presses.I wonder if Hornady is doing the same?
those presses are twins.
HMP
That one makes business sense, actually. There can't be enough 50 BMG shooters to support two press makers. Heck, there are hardly enough to support one!
According to RCBS, their press castings are done in the U.S.
Hope this helps.
Fred
That's exactly what I was told by a service rep less than 4 months ago. They DID try Asian casting for a few months but found the quality as unacceptable and brought the business back to the U.S.
I also pointedly asked about the molds and again was told they had tried overseas but were dissatisfied with the products.
Edd
Charter member Michigan liars club!
"The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in Government." -- Thomas Jefferson
"Consider the clown(s) just one of God's little nettles in the woods, don't let it detract from the beauty. Sooner or latter you are going to run into the nettles regardless of how careful you are."
Beware of man who types much, but says nothing.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |