I have read this that and the other thing,, about applying moly to cast pistol bullets.
http://cgi.ebay.com/35lb-cap-Rock-Tu...item3cb68574f0
I have this type of tumbler,,
I just got the moly, and and built a lil pvc tube cylinder tumbling tube, but made a smaller 5in round tube, some BB's
I'll put 200+ 9mm rn's in the tube and give them a spin tonight,,
Then push them through the sizer,, with no wax lube,,,
I'm very interested on how this,, Impact plating will work.
Any thoughts,,