For those that use start sizers . Do you have problems with lube on the nose's of your bullets ???
For some reason I get lube on the pushed through bullets , not alot but each one need sto be wiped off.
Any suggestions ??
Thanks
RR
For those that use start sizers . Do you have problems with lube on the nose's of your bullets ???
For some reason I get lube on the pushed through bullets , not alot but each one need sto be wiped off.
Any suggestions ??
Thanks
RR
PRACTICE DOES NOT MAKE PERFECT !!! PERFECT PRACTICE MAKES PERFECT !!!!!!
HOME OF THE 500 MAGNUM TYRANNOSAURUS THUMPER'S.........
USS SARATOGA CV-60
You probably need to make some small adjustments on the bullet punch die, keep trying to adjust until you get bullets that don't have lube ooze getting past the seated bullet.
Also, perhaps theres too many lube holes open on the lube die body, you can plug up some of those holes with NO. 7 lead shot...thus, restricting the area of lube on the bullet.
Jim
Last edited by Swagerman; 10-01-2006 at 09:04 AM.
Also has to due with pressure on the lube resevoir. Less air pressure if you are using air or less spring pressure if you are manual. If using hard lubes that require heat, less heat.
fecmech right on.
It is the same thing that Magma said when I called with the same problem. I found that temperature had the most to do with it.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |