Finally, the 25 Cal GB that as been asked for.
NOTE: for those who are interested in the lighter wt boolit, the plain base option that will wt approximately 85gr. If you want this you must know that it has a long nose for the body. Since you can only have one nose and then try to adapt it to several boolit lengths the long nose on the shortest boolit will be a trade off for making the nose an appropriate length for the heavier boolits.
Here is one picture that will outline the lengths that will be available.
Here is a link to the thread that started this.
http://castboolits.gunloads.com/showthread.php?t=92400
Still working on the HP dimensions.
You may get any combo of lengths you want in the mould.
EX: 3C may have one 120gr and two 100gr
The 120 and 100gr will be GC. You cannot get it any other way.
The 85gr will be plain base, no you cannot get it GC'ed, sorry.
Prices:
1 cavity moulds are $68 ea.
2 cavity moulds are $72 ea.
3 cavity moulds are $79 ea.
4 cavity moulds are $85 ea.
5 cavity moulds are $92 ea.
1 cavity hp on the above moulds $35, extra pins $1.50
BRASS MOULD OPTIONS
unavailable
NO RG's will be available.
Shipping to you with insurance will be $10
A Lyman, RCBS type top punch is included along with a sample of Bull Plate sprue lube.
Sign up on this thread for what you want.
Send remittance to:
Darrell Steenwyk
112 Old Lime Kiln Rd
Arden, NC 28704
Check or MO is acceptable. For those out of country PM me for pmt options.
I will PM all who have signed up for a final call for pmt about one month prior to production.
Look here for current production schedule.
http://castboolits.gunloads.com/showthread.php?t=83330
I will post paid orders below.