.358 GC rifle boolits 210 gr

[Eagles6]

Came into possession of a box of .358 FP 210 gr boolits with gas check. They are .895 long with a crimp groove and 2 lube grooves. Obviously won't fit my revolver so I assume they are rifle boolits. Haven't been able to identify them through mold pictures. Any ideas?

[stocker]

Rcbs 35-200fngc???

[Eagles6]

Stocker,
Similar but these are 210 gr and don't have the forward crimp groove. It appears that Beartooth Bullets has the same one but doesn't have the mold designation.
Thanks

[stocker]

My 35-200 actually drops bullets at about 210 grains from a w/w alloy. Is the crimp groove in yours further back than the RCBS? It sounds like a boolit made for the 35 Remington cartridge but may work well in other cartridges too.

[Beerd]

can you post a picture?
..

[Eagles6]

http://www.beartoothbullets.com/bulletselect/index.htm

Here's a link, looks just like the 210 gr. Apparently can be used in .357 mag or 35 Remington.

[MT Gianni]

Veral Smiths 358 LFN.

[Hank10]

I have a Saeco mold in that configuration. I shoot them in long range revolver competition by loading them in a 38 spl case. Depending on the length of your cylinder you may have to crimp over the front band even in a 38 case.
H10

[Eagles6]

Thanks all for the info.