Catshooter's 41 K GB is (HERE)

[475/480]

Let's get this 41 K GB started.This is a Lee 6 Cavity mould
**This will be open until we get at least 25 mould orders.
Cost = Mould $ 50 + S/H $ 8 UPS= $ 58.00
PM me for my addy to send check/MO to.
Weight will be 215-220gr in WW.


Sean

[BABore]

I've reviewed the picture posted by 45 2.1, but couldn't find any mention of its weight. Any idea?

[45 2.1]

I've reviewed the picture posted by 45 2.1, but couldn't find any mention of its weight. Any idea?

From memory, it is probably 215 to 220 gr. which is about standard weight for the mag. Alloy and casting methodolgy differences account for several grains weight difference from person to person.

[BABore]

Alloy and casting methodolgy differences account for several grains weight difference from person to person.

And sometimes bullet to bullet.

[45 2.1]

Here is the 41 Keith GB. It should weigh between 219 gr. and 225 gr.
Nose to crimp = 0.405".

[Dutch4122]

Sean-

Check will go in the mail to you this week. Thanks for steping up to Honcho this one!

[porkchop bob]

Here is the 41 Keith GB. It should weigh between 219 gr. and 225 gr.

Is the design shown in reply #5 the one to be provided by this GB? If so, I am in for one. Thanks,
Bob

[Cayoot]

That's a nice look'in boolit!

[Bodydoc447]

Sean,

THANK YOU for honchoing this deal. I have a check for two moulds in the envelope and going out today in the mail box.

THANK YOU 45 2.1. You designed a BEAUTIFUL bullet!! Elmer would be pleased as punch.

Doc

[45 2.1]

Is the design shown in reply #5 the one to be provided by this GB? If so, I am in for one. Thanks,
Bob

Yes, #5 is it.

[ebner glocken]

Great looking bullet! I'm in on this one.

[Firebird]

I'll get my check in the mail this afternoon

Thanks for being the Honcho for this mold

[475/480]

*****Recieved Check's List*****

Dated--7-3-06**

ZIP--- QTY

32127-2
48415-1

[Cayoot]

Let's get this 41 K GB started.This will be open until we get 25 mould orders.


Sean

Well, since you are turning this into a race to see who gets the money together first, cuz your only going to accept 25 orders, I'll sit it out. It's hard to hit a moving target.

In my opinion, these things should be put on a time line, not a race like this. You might not have ment to give the impression, but what I perceive is "get your money in now or screw you".

I guess I have a chip on my shoulder, and since I'm not a honcho, I really have no right to say anything, but I just had to get it off my chest.

I'm not going to budget and try to save for something when i know I might sign in here and read "25 orders reached....GB now closed" just when I get the cash all together to send out.

[475/480]

Well, since you are turning this into a race to see who gets the money together first, cuz your only going to accept 25 orders, I'll sit it out. It's hard to hit a moving target.

In my opinion, these things should be put on a time line, not a race like this. You might not have ment to give the impression, but what I perceive is "get your money in now or screw you".

I guess I have a chip on my shoulder, and since I'm not a honcho, I really have no right to say anything, but I just had to get it off my chest.

I'm not going to budget and try to save for something when i know I might sign in here and read "25 orders reached....GB now closed" just when I get the cash all together to send out.

**As far as I know we are NOT racing to 25.It will probably take a month or more to get 25 orders.
The 25 was stated to show that we will WAIT untill we get a MINIMUM of 25 ( even if it takes 1-2 months) before placing the order.
And YES you seem to have a chip on your shoulder.

Sean

[45 2.1]

Come on now guys, we're not enemies. A little more cordiality and understanding.

[ebner glocken]

This will be my first .41 mold I have bought for my blackhawk. What's a good diameter to size to?

[45 2.1]

This will be my first .41 mold I have bought for my blackhawk. What's a good diameter to size to?

Depends somewhat on your alloy, but cylinder throat to 0.0005" over.

[Cayoot]

**As far as I know we are NOT racing to 25.It will probably take a month or more to get 25 orders.
The 25 was stated to show that we will WAIT untill we get a MINIMUM of 25 ( even if it takes 1-2 months) before placing the order.
And YES you seem to have a chip on your shoulder.

Sean

Yes, I agree that I do seem to have a chip on my shoulder, otherwise why would I have read in to your posting so wrong?

Well, I appologize, I took it all wrong and reacted in an inappropriate manner.

I think I'm going to have to grab a file and get to work on that chip.

[plb60]

sent my check for one mold on 7-3. thanks for being the honcho on this one