Beagle, as I look at the HP pin now, it definately doesn't seem to have enough draught. Urny said it was a rat b*stard to let go of the boolit. He was supposed to get me the measurements off it so I could make another, "New and Improved" one. I have since begun keeping a drawing with dimensions on it for each thing that I do.
Urny said it worked great otherwise.
..............Buckshot
Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always
Proud former Shooters.Com Cast Bullet alumnus and plank owner.
"The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance
You stole parts of that from a Penn levelwind reel didnt you ?? bwaa haa haa
Bill
Both ends WHAT a player
Rick...Looks like good work.
You can save the work of that cam by drilling a hole in the side of the mould and using a shanked 4-40 or 6-32 screw to hold the HP pin captive and it will align and index just fine. One tap and it releases the bullet and then when inverted, it falls off if the taper is right.
That was the Cramer and early Ideal method like they used on their HB design moulds.
But that will work good....just extra work./beagle
NICE WORK buckshot!!!
...............Thanks guys!
.............Buckshot
Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always
Proud former Shooters.Com Cast Bullet alumnus and plank owner.
"The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote