Anyone got data for SR 7625 in 8x57 mauser?
Anyone got data for SR 7625 in 8x57 mauser?
Some where between here and there.....
Use it as a fast Unique. ... felix
felix
Hmmm,
I found online a guy who used 12-14gr of unique with a 255gr in an 8x56R.
Another guy is using 13gr of Unique with a 150gr in a .30-06
Yet another is using 13.0gr of Unique with a 160gr in a .303
So I'm guesstimating here, if I drop down to about 8-10gr of Unique with a lee 170gr in my 8x57 and work up, I should be okay?
Some where between here and there.....
Based upon that info, go with 12 grains 7625 for starters, and hover around that area until you get good ignition. Try various primers at the same loading(s) and seating depth to hone it down pat. ... felix
felix
..............One of our Burrito Shooters uses 10.0grs of Unique under a 160gr slug in his 8x57. It works well at 50 yards, but just makes a kind of POP! We kid him about his slug maybe just bouncing off the cardboard target backer, and tell him it has to make a real hole you can see daylight through, and that dimples in the paper don't count!
I've used SR7625 haveing been given a pound of the stuff and found it just like a cleaner burning Unique. As Felix mentioned it being faster, I think they are pretty dang close.
...............Buckshot
Father Grand Caster watches over you my brother. Go now and pour yourself a hot one. May the Sacred Silver Stream be with you always
Proud former Shooters.Com Cast Bullet alumnus and plank owner.
"The Republic can survive a Barack Obama, who is, after all, merely a fool. It is less likely to survive a multitude of fools such as those who made him their president."
Shrink the State End the Fed Balance the budget Make a profit Leave an inheritance
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |