RotoMetals2Inline FabricationReloading EverythingLee Precision
Load DataRepackboxWidenersSnyders Jerky
MidSouth Shooters Supply Titan Reloading
Results 1 to 7 of 7

Thread: 6mm bullet?

  1. #1
    Boolit Master
    Join Date
    Mar 2005
    Location
    Mentone, Alabama
    Posts
    1,139

    6mm bullet?

    Anyone got a reccomendation for a 243 bullet? Friend has one in a Handirifle and we've decided to give it a try. So who makes a good bullet for this. Anyone get a few samples they wouldn't mind sending our way? Thanks, JohnH

  2. #2
    Boolit Grand Master
    9.3X62AL's Avatar
    Join Date
    Mar 2005
    Location
    Redlands, NorKifornia
    Posts
    11,551
    I can send some RCBS 95 SP your way. I assume you would like them sized/lubed/checked? 12.0 grains of 2400 does good things in my rifle, and the RCBS Cast Bullet Handbook shows this powder at 13.0-15.0 grains as recommended loads.

    Send along a snail mail address via PM.
    I don't paint bullets. I like Black Rifle Coffee. Sacred cows are always fair game. California is to the United States what Syria is to Russia and North Korea is to China/South Korea/Japan--a Hermit Kingdom detached from the real world and led by delusional maniacs, an economic and social basket case sustained by "foreign" aid so as to not lose military bases.

  3. #3
    Boolit Master carpetman's Avatar
    Join Date
    Mar 2005
    Location
    San Angelo,Texas
    Posts
    2,281
    JohnH--Dep Al beat me to offering to send you some of the same---95 grain RCBS. You didnt ask for powder info--but I'll give you my experience. My old Lyman 44th edition--copyright 1967 listed a load of IMR 4227 13.0--18.0 max. The Lyman Cast Bullet Manual copyright 1980 and as late as Nov 1999 lists a starting of 19.3 and max of 24.5. I still find it odd that the newer starting was above the old max. Anyways I tried it from the old start all the way up in .5 grain increments. The results were fairly good all the way up,but 23.5 grains was magic. 24.0 and 24.5 were off the paper.

  4. #4
    Boolit Master
    Join Date
    Mar 2005
    Location
    Mentone, Alabama
    Posts
    1,139
    Thanks Carpetman, appreciate that.

  5. #5
    Boolit Grand Master







    Join Date
    Apr 2005
    Location
    Omaha, Ne.
    Posts
    5,422
    JohnH, The only cast bullet that I have had good luck with is the 85gr. Lyman RN, can't remember the number, but it is still made. Mine is probably 25 yrs old or more. A Livorn (sp) type bullet. Shoots well in all three of my 243's with moderate charges of 2400 and RD in the Vol range of 1600-1800 range. Have not tried the other bullets recommended. Have a mold for a 95 gr. Lyman that won't shoot through anything I have because it is just to long.
    1Shirt

  6. #6
    Boolit Master Maven's Avatar
    Join Date
    Mar 2005
    Posts
    4,952
    John H, The Loverin the previous poster mentioned is #245496, which is still available from Lyman. I have it and a slightly lighter hollow-pointed version of it and they do shoot rather well from my Ruger #1. I also have the Lyman spire point mold (95gr.) and the ~100gr. RCBS version of it, but couldn't get them to shoot worth a tinker's dam. I sold the RCBS, but still have the Lyman SP if you're interested (single cav., like new; casts beautifully). ...Maven

  7. #7
    Boolit Master
    Join Date
    Mar 2005
    Location
    Trinity, Tx
    Posts
    955

    Thumbs up .243 loads

    I have the Lyman , mine come out 90gr with lube and gas check.
    14gr IMR 4227, 1500fps, put 3 in .2" at 50yd, 16gr , 1650fps, did .4" at 50yd, 24gr IMR 4198 gave 2300fps and 2 touching, one 1/2" to the right, 26gr gave 2575fps and all three shots missed the lower right target on a 4 bull target.
    Rem. 788, 4x Gibson's scope from the '80's from a good rest.
    Don

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check