Lee PrecisionMidSouth Shooters SupplyADvertise hereTitan Reloading
RepackboxReloading UKInline FabricationRotoMetals2

Page 1 of 9 123456789 LastLast
Results 1 to 20 of 175

Thread: 429421 Keith Group Buy is Here

  1. #1
    Boolit Master



    SciFiJim's Avatar
    Join Date
    Mar 2009
    Location
    Fresno, CA
    Posts
    3,491

    429421 Keith Group Buy is Here

    429421 Keith Group Buy is Now Open.


    Enough people have expressed an interest in the Keith Poll to run this.

    This Group Buy is for a 429421 Keith boolit that designed for the 44 Magnum rifle and pistol. It can be used in any of the 44 caliber class cartridges like the 44 Special, 44 Magnum, 444 Marlin. The molds will be produced by Night Owl Enterprises (NOE) in their standard 1-5 cavity molds AND the RG Hollow Point molds.

    The 429421 Keith Group Buy will close on December 14th. If we donít have 15 orders by then, the close date will be extended until we do.

    Flat Nosed Boolit




    Hollow Pointed Boolit




    Moulds will be machined from 2024 Aluminum
    Used for high strength structural and aircraft applications.
    Tensile strength range 30,000 to 63,000 psi
    Sprue plate (blued), alignment pins, and hardware will be
    carbon steel.



    The cost will be as follows:

    Standard Molds
    Single cavity mould $68.00 Ea.
    Double cavity mould $72.00 Ea.
    Three cavity mould $79.00 Ea.
    Four cavity mould $85.00 Ea.
    Five cavity mould $92.00 Ea.
    Hollow pointing one cavity and furnishing a double ended pin would be $35.00 extra.
    If you want to fashion different HP profiles, an extra blank pin would be $1.50

    RG Molds
    Two cavity RG2 HP mould $96.00 Ea.
    Includes one set of hollow point pins
    and one set of flat nose pins.
    If you want to fashion different HP profiles for the RG2 an extra blank pin set of two (2) would be $4.

    Four cavity RG4 HP mould $126.00 Ea.
    Includes one set of hollow point pins
    and one set of flat nose pins.
    If you want to fashion different HP profiles for the RG4 an extra blank pin set of four (4) would be $8.

    Shipping and handling will be $10 per order and shipped priority mail. If you live outside the United States contact me, and I will work with you.



    Lead time is 4-5 weeks after Group Buy closes. Tooling will be ordered once we get to 15 paid orders so donít delay.

    Instructions for using the Group Buy order system page are HERE.

    Use the Group Buy order system HERE to place your order. Use the link provided or use the link at the bottom of the page. Print two copies of the order sheet and mail both to me with your payment. Once we are ready to go, I will place the order with NOE. The molds will be shipped to me and I will distribute them. I will accept bank check, money order or PayPal + $4.50. If using PayPal contact me first.

    The mold is machined to use LEE Commercial 6-Cavity handles (not included).
    A Lyman, RCBS type top punch is furnished with each mould as well as a sample of Bull Plate sprue plate lube.

    Visitors from other forums are welcome to participate in this group buy.
    Email me at scifijim - at - gmail.com
    Do the normal voodoo with the address to make it work, I don't want spambots to skim for my address.

    Please leave a post here or PM me when you order and I will add you to the list.

    I will post a running list of confirmed orders with username and options and a list of zip codes that payments have been received from in the next post.
    Thanks
    Jim


    Custom Cast Boolits Google Search


    The Learning Never Stops!

  2. #2
    Boolit Master



    SciFiJim's Avatar
    Join Date
    Mar 2009
    Location
    Fresno, CA
    Posts
    3,491
    Orders
    1. GLL - single cavity w/HP + 3 blank pins
    2. GLL - 4 cavity
    3. ddeaton - 5 cavity
    4. Trey45 - RG2 + 1 blank pin set
    5. timbuck - RG4 + 2 blank pin sets
    6. pack3480 - 5 cavity w/HP
    7. 358wcf - 3 cavity w/HP
    8. Thumbcocker - 4 cavity w/HP
    9. ddixie884 - RG4
    10. DuaneH - 4 cavity
    11. 1917 - 3 cavity + 2 blank pins
    12. coxd - RG2
    13. Calehedron - 5 cavity w/HP
    14. Lloyd Smale - RG4
    15. Bob J - 5 cavity
    16. SciFiJim - 4 cavity
    17. Lloyd Smale - RG4
    18. Bob J - 5 cavity
    19. That'll Do - 4 cavity
    20. knifemaker - 5 cavity
    21. Alchemist - 2 cavity
    22. 376Steyr - 5 cavity
    23. nseries - RG2 + 2 blank pin sets
    24. fivegunner - RG4 + blank pin set
    25. chprplt - 5 cavity w/HP
    26. partsman - RG2

    Zip Codes of payments received
    91106 x2
    27979
    62846
    61725
    73063
    89429
    49862
    02171
    15241
    95919
    85143
    49331
    53132
    98328
    75554
    Last edited by SciFiJim; 12-19-2009 at 10:19 PM. Reason: Added orders or zip codes


    Custom Cast Boolits Google Search


    The Learning Never Stops!

  3. #3
    Boolit Master
    GLL's Avatar
    Join Date
    Mar 2005
    Location
    California
    Posts
    3,562
    One single cavity-HP + 3 extra pins
    &
    One 4-cavity please !

    Jerry
    S&W .38/44 Outdoorsman Accumulator

  4. #4
    Boolit Master



    SciFiJim's Avatar
    Join Date
    Mar 2009
    Location
    Fresno, CA
    Posts
    3,491
    Jerry,
    I should just send you all the specs first. This makes you 7 for 8 on the group buys that I have run.

    I added you to the list.
    Thanks
    Jim


    Custom Cast Boolits Google Search


    The Learning Never Stops!

  5. #5
    Boolit Master ddeaton's Avatar
    Join Date
    Feb 2008
    Location
    SW Ohio
    Posts
    864
    qty 1 5 cavity please

  6. #6
    Boolit Master Wayne S's Avatar
    Join Date
    Jan 2009
    Location
    Bagdad {no "H"} Fla
    Posts
    1,386
    I'll probably get in on a RG 2 a little later on but I have a question, Why so big [.434] or is this the Dem. of the cherry and the actual "as cast" will be something llike .432 ???
    IHMSA # 566 "time sure flies when you're having FUN"

  7. #7
    Made in U.S.A.
    SwedeNelson's Avatar
    Join Date
    Mar 2005
    Location
    Provo, Utah
    Posts
    2,627
    Wayne S

    The drawing size is what the finished bullet should cast.
    We are using .434 to cover all the Ruger BlackHawks
    with large throats. Will size down very good for others.



    .433 pin in throat.

    Swede Nelson
    The expectation of evil is more bitter than the suffering -OR-
    More people die from worrying about getting ate by a bear then get ate by a bear.

  8. #8
    Moderator Emeritus


    Trey45's Avatar
    Join Date
    Apr 2009
    Location
    Dismal Swamp NC
    Posts
    4,436
    I'll take an RG2 HP $96 with an extra set of pins $4.
    Give us this day our daily lead.

    Sic Semper Tyrannis.

    If you don't want 1984 you're going to need some 1776.
    WWGWD

  9. #9
    Ooooo, I'll get in on this monday when I can make it to the post office to send the forms. Anyone have a pic of what the RG mold bullets look like when the flatnose pin is used?
    Machinists do it with precision.

  10. #10
    Boolit Master

    fivegunner's Avatar
    Join Date
    Aug 2005
    Location
    LOWELL Michigan
    Posts
    658

    429421

    I would like a 4 cavity HP.

  11. #11
    Just noticed this:

    Extra blank pins by themselves are $1.50, but a set of four with the mold is $8?
    Machinists do it with precision.

  12. #12
    Boolit Master



    SciFiJim's Avatar
    Join Date
    Mar 2009
    Location
    Fresno, CA
    Posts
    3,491
    The blank pins for the singe hollow pointing of a cavity are $1.50 each. A set of 4 for the RG4 is $8. The base of the set of 4 for the RG4 has to be machined to fit the slides on the RG4. The blank pins for the single HPing don't need the extra machining as they are held in the handle by a set screw.


    Custom Cast Boolits Google Search


    The Learning Never Stops!

  13. #13
    Boolit Master



    SciFiJim's Avatar
    Join Date
    Mar 2009
    Location
    Fresno, CA
    Posts
    3,491
    machinisttx - Thank you for making me check. I realized that I neglected to add the single blank HP pin option for one of the other group buys I have running.


    Custom Cast Boolits Google Search


    The Learning Never Stops!

  14. #14
    Quote Originally Posted by SciFiJim View Post
    The blank pins for the singe hollow pointing of a cavity are $1.50 each. A set of 4 for the RG4 is $8. The base of the set of 4 for the RG4 has to be machined to fit the slides on the RG4. The blank pins for the single HPing don't need the extra machining as they are held in the handle by a set screw.
    I didn't even think about the extra machining necessary. Not thinking too well after being up since around 4:30 am yesterday morning. Looks like bedtime.
    Machinists do it with precision.

  15. #15
    Boolit Buddy


    Join Date
    Jun 2008
    Location
    East Troy, Wi.
    Posts
    297
    Just signed up for this one. I'm trying to space these group buys out so I will send in the money closer to the closing date of December 14 or when the group buy closes. Thanks.

  16. #16
    Boolit Master



    SciFiJim's Avatar
    Join Date
    Mar 2009
    Location
    Fresno, CA
    Posts
    3,491
    Tim,
    I added you to the list.
    Thanks
    Jim


    Custom Cast Boolits Google Search


    The Learning Never Stops!

  17. #17
    I'll take one RG4 and will pay via paypal. Printing the forms out now.
    Machinists do it with precision.

  18. #18
    Boolit Master



    SciFiJim's Avatar
    Join Date
    Mar 2009
    Location
    Fresno, CA
    Posts
    3,491
    machinisttx - I added you to the list.
    Thank You
    Jim


    Custom Cast Boolits Google Search


    The Learning Never Stops!

  19. #19
    Moderator Emeritus


    Trey45's Avatar
    Join Date
    Apr 2009
    Location
    Dismal Swamp NC
    Posts
    4,436
    Quote Originally Posted by Trey45 View Post
    I'll take an RG2 HP $96 with an extra set of pins $4.
    You have me down for an RG2 but no extra pins.
    Give us this day our daily lead.

    Sic Semper Tyrannis.

    If you don't want 1984 you're going to need some 1776.
    WWGWD

  20. #20
    Boolit Master



    SciFiJim's Avatar
    Join Date
    Mar 2009
    Location
    Fresno, CA
    Posts
    3,491
    I missed it before. It's fixed now.


    Custom Cast Boolits Google Search


    The Learning Never Stops!

Page 1 of 9 123456789 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check