Has anyone tried to size a bullet this much????
Think it could be done????
I'll be using a Lee sizer to do it.
Has anyone tried to size a bullet this much????
Think it could be done????
I'll be using a Lee sizer to do it.
Last edited by abunaitoo; 07-21-2009 at 02:46 AM. Reason: add more info
I believe you´d have to use several different sizers to get down that low. I don´t think you can do it in one stroke.
Uwe
Could it be done?? Probably, with a number of passes. Would it shoot well afterwards?? Probably not. That boolit would be pretty beat up..
PS 45 Nut - Thanks for the promotion. I'll try to live up to it.... Enjoy Mike
I've done it with the Collar Button boolit. Make sure the grooves are full of grease to preserve them. On a "normal" bullet, I would expect some growth in the length and maybe some nose deformation, depending on alloy.
What boollit are you considering squeezing?
Knowledge I take to my grave is wasted.
I prefer to use cartridges born before I was.
Success doesn't make me happy, being happy is what allows me to be successful.
Thats a long way to go. I'm no expert but would think that you would get unacceptable distortion of the boolit. Even if doing it in several passes by changing the sizers.
Shiloh
Je suis Charlie
"A society of sheep must in time beget a government of wolves."
Bertrand de Jouvenel
“Any government that does not trust its citizens with firearms is either a tyranny, or planning to become one.” – Joseph P. Martino
“If you put the federal government in charge of the Sahara Desert , in five years there would be a shortage of sand.” – Milton Friedman
"Ideas are more powerful than guns. We would not let our enemies have guns; why should we let them have ideas?" - J. Stalin
No way to know until you try. Do fill the lube grooves first as said, then go for it!
Cat
Cogito, ergo armatum sum.
(I think, therefore I'm armed.)
definately fill the grooves first.
maybe even again during the process you should have a very soft boolit when done as it will anneal the aloy.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |