Anyone have suggestions for a rear sight pusher for a Ruger MkIII 22/45? Will a "universal" one do it or do I need a firearms specific model? Any suggestions on a "universal" model?
Josh
Anyone have suggestions for a rear sight pusher for a Ruger MkIII 22/45? Will a "universal" one do it or do I need a firearms specific model? Any suggestions on a "universal" model?
Josh
Isn't the sight adustable for windage? Or are you trying to remove it? If you are removing it, just use a large brass punch, etc.
Its adjustable, but wasn't "pushed" in enough to be centered from the factory. I didn't notice it until later and I figured it might be simply easier to move it myself rather than ship it to Ruger. If it can be done with a large brass punch, then that's an easy answer.
Perhaps I'm misunderstanding the purpose of a sight pusher -- is it to adjust the rear sight in the dovetail with the sight is non-windage adjustable? If so, then I just need to get it closer with a brass punch and use my windage adjustment to gain a zero?
Last edited by 0802; 06-09-2009 at 04:44 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |