Where would you crimp this bullet?
Never worked with a TL Lee bullet.
Where would you crimp this bullet?
Never worked with a TL Lee bullet.
Go by the book. Look for the minimum OAL length and don't go lower than that. You can go longer if it works in your action ,but NOT shorter,it creates higher pressures (DANGER). Look for the weight and then look for SWC design in the data. thats where you'll find you info.
You didn't give use enough info to give you any numbers. ei....TL401-180 SWC,,,.TL.452-200 SWC
Crimp in the top groove and call it a day.
JDGabbard's Feedback Thread
Jdgabbard's very own boolit boxes pattern!
GOA and FPC have done more in the last decade than your NRA has done in it's entire existence... Support the ones that actually do something for you.
i use the top groove, and a light crimp at that.
Thanks. That's what i was thinking. It's a TL-430-240-SWC 90399 mold. I didn't know if you crimped these guys on the ridge or in the groove.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |