RepackboxInline FabricationMidSouth Shooters SupplyTitan Reloading
Lee PrecisionRotoMetals2Snyders JerkyWideners
Load Data Reloading Everything
Page 1 of 2 12 LastLast
Results 1 to 20 of 21

Thread: April 100 Yd Bench Rest

  1. #1
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605

    April 100 Yd Bench Rest

    OK folks, I can't wait till may, I was out shooting today with my son.

    His 1891? 7.65 Argentine had a broken firing pin. I shot my Stevens 200 308.

    Load is 311646 over 45 grains of WC860. Groups were 2" today, I need to clean it and try again.

    This time we are shooting for group size. Choose the target that best suits you.

    CAST boolits, any sight any caliber 100 yards, TEN shots.

    Starts today, ends Last day of April.

    Lets see a ONE HOLER!

    David

    Scan and post your target, or take a picture or PM me for my address and I will post it.

    The 50 yard off hand match is still going on. Look at that thread for some of the results.

    Enter early Enter often!

  2. #2
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605
    I cleaned the 308 and put a new firing pin in the mauser. My son and I are going to try again today.

    David

  3. #3
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605
    Umm well, Nothing great except I went out shooting and the mauser functioned flawlessly.

    Best I could do today is 10 shots in a 2.5" wide x 5" tall group. I shoulda tooka picture.

    Another whack at it next week.

    David

  4. #4
    Boolit Grand Master

    imashooter2's Avatar
    Join Date
    Mar 2005
    Location
    PA
    Posts
    7,921
    How long is this one running David? I hope to get out next weekend and shoot a better 50 yard target in between practice for the PSA Shootout. I won't be able to get ammo loaded for the thutythuty and shoot this until sometime in May...

  5. #5
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605
    So far I am the only one to shoot this match. It runs to the end of april. We could extend it.

    I am going to have one a month for a while and see if it catches on.

    David

    This has to be the least looked at section of these forums.

  6. #6
    Boolit Grand Master

    imashooter2's Avatar
    Join Date
    Mar 2005
    Location
    PA
    Posts
    7,921
    I'm just having the classic life getting in the way of my shooting issues. Those 50 yard targets I posted were the last time I was at a range to bum around rather than shoot a match. Well if I can't get in on this one, there's always the next.

    I have to agree on the traffic here. I guess it's more fun to talk about your .3 inch keyboard groups than post your 3 inch ones...

  7. #7
    Boolit Buddy
    BPCR Bill's Avatar
    Join Date
    Oct 2008
    Location
    Battle Ground, Washington
    Posts
    295
    I just finished a 3 day match out of town, and it was nothing to write home about. Broke two rifles the first day and ended up shooting a 22 and borrowing a bench gun for the remainder. I put a new firing pin in my 45-70 Hiwall, I'll shoot that in the next week or so as soon as the weather clears a bit.

    Regards,
    Bill
    America is like a healthy body, and its resistance is threefold: its patriotism, its morality, and its spiritual life. If we can undermine these three areas, America will collapse from within. Joseph Stalin


    "Hope" is not a strategy.

    Life member NRA
    US Navy Retired
    NRA Certified Rifle, Pistol, Metallic Cartridge Reloading Instructor, Range Safety Officer

  8. #8
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605
    I was at the range to shoot my 357 and this target was still there so I DID take a pic.

    Some one beat this....

    My Stevens 200 308. Sumpin aint right.

    Click image for larger version. 

Name:	001.jpg 
Views:	21 
Size:	89.7 KB 
ID:	12918

  9. #9
    Boolit Master


    fecmech's Avatar
    Join Date
    Mar 2005
    Location
    Buffalo NY area
    Posts
    4,033
    I went to the range today with my Winchester 94 AE .357 and shot some groups. Putting 10 shots together at 100 is one hell of a lot tougher than 5 shots. Just so no on else feels embarassed with their groups I'll show mine and if you can't beat these--enough said! There was no special effort made with this ammo, it's what I shoot every day. Bullets are from 4 and 6 cavity molds with visual inspection during casting and sizing and loaded on a progressive CH Auto Champ press.
    Last edited by fecmech; 11-22-2009 at 04:08 PM.
    "Masculine republics give way to feminine democracies, and feminine democracies give way to tyrannies.” Aristotle

  10. #10
    Boolit Master
    Join Date
    Jul 2008
    Location
    Paw Paw, Michigan
    Posts
    2,008
    They are MOH (minute of hostile)

  11. #11
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605
    I just found a box of TEN loaded up 308's I am going to try. The last batch wasn't worth much as you saw.

    Thanks to those that are shooting this.

    David

  12. #12
    Boolit Grand Master

    imashooter2's Avatar
    Join Date
    Mar 2005
    Location
    PA
    Posts
    7,921
    After I wasted my time shooting all those offhand targets, I popped up and put 20 down range with the 30AS. Not my best efforts, but at least I have a horse in the race. I'll get a scan up in a bit...

  13. #13
    Boolit Grand Master

    imashooter2's Avatar
    Join Date
    Mar 2005
    Location
    PA
    Posts
    7,921
    Here it is. I make it at about 3.080, but will send it in with my offhand target for the official scoring. All the pertinent info is on the target except for OAL which was 2.410 inches and sights which was a Simmons 3x9 scope.

    ETA: 15.5 grains of 2400 gets 1,739 fps average in my 30AS.

    Last edited by imashooter2; 04-19-2009 at 12:43 PM.

  14. #14
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605

    This is getting good

    Nice targets. I shot this one Friday on my lunch. Same gun and load as above.

    Stevens model 200, 308, 311644 190 grain Water dropped boolit with gas check. Lar45 lube, 45 grains surplus WC860. Regular primer, dirty gun......

    Click image for larger version. 

Name:	025.JPG 
Views:	14 
Size:	87.1 KB 
ID:	13065

    Click image for larger version. 

Name:	027.jpg 
Views:	13 
Size:	97.4 KB 
ID:	13066

    Nice to see so much shooting going on.

    David

  15. #15
    Boolit Master
    Doc Highwall's Avatar
    Join Date
    May 2007
    Location
    Ct
    Posts
    4,615

    Talking

    These are only five shot groups but it was the first time that I ever shot this gun. I bought/stole it at Kittery Traiding post about five years ago. These are with SAECO #315 and AA5744 powder out of my Remington 40X.
    Last edited by Doc Highwall; 12-04-2009 at 02:45 PM.

  16. #16
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605
    Put together 10 shots and post the target. Looks like you could run away with it!

    David

  17. #17
    Boolit Master
    Doc Highwall's Avatar
    Join Date
    May 2007
    Location
    Ct
    Posts
    4,615

    Talking

    This morning I went out to the range with my Remington 40X in .308Win loaded with the SAECO #315, NASA lube from the Bullshop, 19.2 grs of AA5744 thrown charges, Fed cases, and Rem 9 1/2 primers COL 2.750. Using On Target software 10 shot group measures .781 ctc- .710 width- .588 high
    Last edited by Doc Highwall; 12-04-2009 at 02:45 PM.

  18. #18
    Boolit Grand Master

    imashooter2's Avatar
    Join Date
    Mar 2005
    Location
    PA
    Posts
    7,921
    Huh! That has the earmarks of a winner!

  19. #19
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605
    Yeah, we have a winner So Far. The match isn't over, but I aint gonna top that one unless I cast and load some for my 22-250. Then I don't know if I can top that one or not.

    Doc Hiwall, I use a tape measure, you went to 3 decimal places. Good shooting!

    David

  20. #20
    Boolit Master
    Join Date
    May 2005
    Location
    Western NY
    Posts
    1,605
    Imashooter2, I have your target and it measures 2 3/4". This puts you in second.

    Good shooting by everyone.

    It aint over yet!

    David

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check