RotoMetals2Load DataRepackboxInline Fabrication
MidSouth Shooters SupplyReloading EverythingSnyders JerkyWideners
Titan Reloading Lee Precision
Results 1 to 8 of 8

Thread: Alberta Schuetzen Lube

  1. #1
    Boolit Bub
    Join Date
    Apr 2017

    Alberta Schuetzen Lube

    I recently acquired the recipe to this Lube and made a batch I know that it is very popular with Canadian shooters in both the BPCR and Schuetzen shooters. I was wondering if anybody on here had tried it with smokeless powder and cast bullets?

  2. #2
    Boolit Grand Master

    Join Date
    Mar 2013
    Northwest Ohio
    Come on dont keep it to yourself share the recipe with us.

  3. #3
    Boolit Bub
    Join Date
    Apr 2017
    I will be happy to later on today just getting going here now

  4. #4
    Boolit Master

    FLINTNFIRE's Avatar
    Join Date
    Apr 2012
    Longview, Washington
    I found the recipe on ASSRA forum in a lube thread , may have to make a batch .

  5. #5
    Boolit Buddy

    K43's Avatar
    Join Date
    Aug 2020
    I found it.

    Post Reply #115 by Schuetzendave

    "Alberta Schuetzen Lube Recipe

    35 oz. (993 grams) Charcoal Filtered Beeswax (lubricity, stickiness)
    16 oz. (454 grams) Commercial Toilet Ring Seal (lubricity, increase stickiness)
    16 oz. (454 grams) Crisco Vegetable Shortening (lubricity, viscosity adjuster)
    5 oz. (142 grams) Anhydrous Lanolin (lubricity, stickiness)
    3 oz. (85 grams) Ivory Dish Washing Detergent (emulsifier, mixer, cleaner of fouling)
    2 oz. (57 grams) Canola Oil (lubricity, viscosity adjuster)
    1 oz. (28.4 grams) Opti-Lube Oil Fortifier (metal conditioner)

    2 oz. (57 grams) Ground Rock Rosin (increases stickiness) But will fall out of suspension if melted again for pan lubing.

    Add a large can of Black Kiwi Shoe Polish to show bullet holes better on red targets.

    Viscosity is suitable for shooting from - 40 F. to 110 F.
    Has improved stickiness and will not allow sloughing off at higher temperatures.
    Metal conditioning of the barrel reduces the potential of lead adhering.
    Has built in emulsifier (does not rely on saponification to occur) to better collect, mix and wipe out fouling for both Black Powder and smokeless powders."

  6. #6
    Boolit Bub
    Join Date
    Apr 2017
    Yep, that's the one I have. Do you guys shoot it much or have you tried it?

  7. #7
    Vendor Sponsor

    Chill Wills's Avatar
    Join Date
    Oct 2011
    Was-Colorado, Wyoming now
    No, I have not tried it but it looks to be well thought out.
    I might try it next winter when I get the time.

    The following is just my opinion, in my experience, there are two kinds of BPCR lubes. Those that work and those that don't. So far, I know of no magic lubes that allow you to shoot unlimited shots without some kind of additional fouling control.
    Chill Wills

  8. #8
    Boolit Grand Master
    Join Date
    Nov 2008
    Central VA
    Down here South of the Border, I discovered Emmert’s lube for pan lubing and either something from Charlie Dell’s lube collection or my own “Frog Guano”. None uses JPW though. I still have a can or two around somewhere.
    "It aint easy being green!"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check