Titan ReloadingReloading EverythingLoad DataRepackbox
Lee PrecisionSnyders JerkyMidSouth Shooters SupplyWideners
RotoMetals2 Inline Fabrication
Results 1 to 5 of 5

Thread: Are gas checks required if you're using a felt wad and grease cookie?

  1. #1
    Boolit Mold
    Join Date
    Aug 2013
    Location
    Bruderheim, Alberta, Canada.
    Posts
    11

    Are gas checks required if you're using a felt wad and grease cookie?

    I recently started to reload for a new pedersoli sharps rifle. An old aquaintence told me that I wont get any accuracy if I dont use a gas check. I've been reading "Buffalo Rifles of the old west" and they don't mention the use of gas checks at all. I'm paper patching a .446 dia mony boolet from a mold purchased from Buffalo arms. I use a 1/8"felt wad behind the patched boolet over a grease cookie and a wad cut from a cardboard milk carton over 70 gns of 2F Goex. So what do I need to do? Gas check or not?
    Any advice would be greatly appreciated!
    Thanks in advance,
    Armouredtrooper.
    Royal Canadian Armoured Corps 1974-1998

  2. #2
    Boolit Grand Master Nobade's Avatar
    Join Date
    May 2005
    Location
    SE WV
    Posts
    6,303
    No gaschecks used in that setup.

  3. #3
    Boolit Man


    Join Date
    Aug 2020
    Location
    MD
    Posts
    82
    As Nobade state; No gas check required. The paper patch and two wads are plenty enough to protect the base of the boolit.

  4. #4
    Boolit Master
    405grain's Avatar
    Join Date
    Apr 2012
    Location
    Modesto, Ca.
    Posts
    1,268
    Back in the days of the old west, when buffalo hunters were using Sharps rifles, gas checks hadn't been invented yet. IIRC the first bullet that was designed to use a crimped on gas check was the Lyman #311284, which was made for the 30-40 Krag. Your grease cookie, card wad, and felt wad are what you need for your patched bullets. If you were shooting regular cast bullets without any wads gas checks would be beneficial.

  5. #5
    Boolit Master

    Join Date
    Apr 2005
    Location
    Montana
    Posts
    1,835
    Quote Originally Posted by armouredtrooper View Post
    ........ .446 dia mony boolet from a mold purchased from Buffalo arms ..........
    that's a plain base bullet, no?
    ..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check