My eye sight had been deteriorating as Ive got older and my handgun ability has gone south since then and getting worst as I get even older.
Well, I had been reading and observing of others that had put a red dot reflect sight so I had to check it out. I ended up buying a mount from Alchinguns. They have two mounts: one for RMR and another for RMSc. I thought I pressed the RMR type but found out I had the RMSc type. Ive just went ahead and mounted in my Ruger GP100, 6 barrel revolver. Today, I took it to the range and tested some loads that were printing between 4 and 5 at 25 yards with open sights and also I loaded some 38 spc load with 125 gr Lee cast and 3.52gr of Bullseye with cci-550 primer(dont have spp at hand).
I was able to print a group with the 158gr Speer jsp, 14.6gr 2400, and cci-500 of 1.5 at 25 yards and 1.6 with the 125gr cast, also at 25 yards.
I am happy with that but I will get some new loads to see how can I improve it and take it to 50 yards.
Have you guys done that?
I like to know some accurate loads in 1000 to 1200 fps that work well for you.
Thanks.
Camba
Sent from my iPhone using Tapatalk