RepackboxMidSouth Shooters SupplyTitan ReloadingReloading Everything
Load DataWidenersSnyders JerkyInline Fabrication
RotoMetals2 Lee Precision
Results 1 to 13 of 13

Thread: Neat ship yard stuff

  1. #1
    Boolit Master Wolfdog91's Avatar
    Join Date
    Mar 2020
    Location
    Amite County MS
    Posts
    983

    Neat ship yard stuff

    Pretty cool out here at this lil ship yard. Ouf boats finally coming back out but where other stuff goin on and it's been a near dealFew of welders have been cool to talk with.... basically need a translator though our tankerman for most of the conversation but still.


    Sent from my motorola edge 5G UW (2021) using Tapatalk
    A wise man will try to learn as much from a fool as he will from a master, for all have something to teach- Uncle Iroh
    MS Army Guard 2016-2021

  2. #2
    Boolit Master
    Join Date
    Apr 2009
    Location
    North Dakota
    Posts
    531
    Do they just take them out of the water for repairs ? Not alot of stuff like that going on in North Dakota.

  3. #3
    Boolit Grand Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    14,567
    What repairs were needed to be done.? Interesting to see. Heavy lifts take almost as much planning as the actual lift does.

  4. #4
    Boolit Master
    405grain's Avatar
    Join Date
    Apr 2012
    Location
    Modesto, Ca.
    Posts
    1,250
    That looks like the kind of river tug that's used to push barges. There are similar small shipyards in harbors along the coast of Northern California and Oregon, but they are used to work on fishing trawlers.

  5. #5
    Boolit Master

    FLINTNFIRE's Avatar
    Join Date
    Apr 2012
    Location
    Longview, Washington
    Posts
    1,662
    That is a smaller tug , what are the dimensions , length , width , draft , height , and of course horsepower , fleeting or harbor or line haul ?

  6. #6
    Vendor Sponsor

    DougGuy's Avatar
    Join Date
    Apr 2013
    Location
    just above Raleigh North Carolina
    Posts
    7,410
    I have worked on a gob of tugboats/pushboats like that, they run "the ditch" (intracoastal canal) in Carolina, half the time they scraping bottom, it's sandy and shallow and they have keel coolers welded out of 2x6 channel on the bottom, we were constantly replacing those, and piping. The little yard I worked in at that time had a rail system to take boats in and out of the water.

    Thanks for the post!
    Last edited by DougGuy; 02-08-2024 at 07:30 PM.
    Got a .22 .30 .32 .357 .38 .40 .41 .44 .45 .480 or .500 S&W cylinder that needs throats honed? 9mm, 10mm/40S&W, 45 ACP pistol barrel that won't "plunk" your handloads? 480 Ruger or 475 Linebaugh cylinder that needs the "step" reamed to 6° 30min chamfer? Click here to send me a PM You can also find me on Facebook Click Here.

  7. #7
    Moderator


    Join Date
    Apr 2014
    Location
    Way up in the Cascades
    Posts
    8,191
    Great photos, Wolfdog91. Thanks for sharing them.

    DG

  8. #8
    Boolit Master
    Join Date
    Aug 2008
    Posts
    988
    with all the logs, trees, railroad ties, etc that a tug has to run over I'll bet the prop protectors/cages get checked and/or repaired every time it comes out of the water.

  9. #9
    Boolit Master
    Join Date
    Jan 2010
    Location
    South Louisiana
    Posts
    637
    IIIRC youre in Vicksburg, so those are Miss River Barges. Not often do they take them out of the water for repair, usually most stuff is done in water, unless its really bad like major welding, shaft/prop repair.
    NRA High Master XTC
    DR# 2125

  10. #10
    Boolit Master
    Join Date
    Mar 2007
    Location
    Pitt Gas,PA
    Posts
    688
    I am amazed how much weight those straps can pick up

  11. #11
    Boolit Master
    Join Date
    Nov 2017
    Location
    brisbane ,qld,australia
    Posts
    2,154
    Where I worked ,the blasters and painters were allowed to go to work in the shipyard for a few days,then come back to work normally...........bosses werent happy,but probably better than losing them all together .......the ship work paid 3x what our yard paid ...over $100hr ,a lotta years ago (20)

  12. #12
    Boolit Master
    John Guedry's Avatar
    Join Date
    Dec 2005
    Location
    Baton Rouge La.
    Posts
    557
    Love those pictures. Thanks for sharing. Shows what goes on behind the scenes and all the work that is mostly done "behind the scenes" to keep this great country moving ahead.
    Old retired guy in Baton Rouge La.

  13. #13
    Boolit Buddy
    Join Date
    Apr 2010
    Location
    Ohio
    Posts
    452
    Wolfdog91, what language are the shipyard workers speaking?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check