Lee PrecisionMidSouth Shooters SupplyLoad DataTitan Reloading
PBcastcoRepackboxInline FabricationReloading Everything
Wideners RotoMetals2
Results 1 to 2 of 2

Thread: 38 Ballard EXL

  1. #1
    Boolit Buddy
    Join Date
    Jan 2009
    Location
    Goffstown, NH
    Posts
    318

    38 Ballard EXL

    38 Ballard EXL utilizes a heel bullet with a single grease groove ahead of the case. Would these bullets have been outside lubricated originally or would the shooter be expected to lubricate prior to shooting? Any pictures I've found of this cartridge shows no evidence of lubricant. Thanks, Dan

  2. #2
    Boolit Master
    Join Date
    Jan 2018
    Posts
    2,431
    I personally lube them in addition to the groove, I keep them in an mtm case with a piece of rigid foam installed to hold the tips and cut down on debris. I have used the upside down lubrisizer trick also and it works well.

    Sent from my Pixel 5 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check