MidSouth Shooters SupplyPBcastcoRepackboxLee Precision
Reloading EverythingWidenersInline FabricationTitan Reloading
Load Data
Results 1 to 3 of 3

Thread: 6mm Winchester lee bullet help

  1. #1
    Boolit Bub
    Join Date
    Sep 2016
    Posts
    72

    6mm Winchester lee bullet help

    I just purchased a Winchester Lee and want to use cast bullets.
    Who makes an appropriate mold for this rifle.
    Thanks

  2. #2
    Boolit Master
    Bent Ramrod's Avatar
    Join Date
    Apr 2005
    Location
    Southern Arizona
    Posts
    4,269
    Iíve used the Ideal 244203 (65 gr, in the mould I found) and the 245477 Loverin gas-check, nominally 93 gr.

    The plain-base Kephart 244203 was the original design made for the Winchester-Lee, but that was decades before the proliferation of 6mm rifles we have now. I would say for the Lee, any 6mm design should work, the longer the better.

  3. #3
    Boolit Buddy
    Join Date
    Dec 2010
    Location
    Holden Ma
    Posts
    177
    RCBS has the best one I’ve used it’s 96/97 Grns . I’ve got one from NOE that I haven’t even poured into yet spose to be 105-106 grns I think . Depends on what kind of twist you have and also what you want to do with it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check