Built a stand to hold my trickler, funnel. scale and dipping bowl. Made from 1/4" plate so the scale has a good solid base to sit on with the trickler set up to drop right over the powder pan.
|
   
   
|
|
Built a stand to hold my trickler, funnel. scale and dipping bowl. Made from 1/4" plate so the scale has a good solid base to sit on with the trickler set up to drop right over the powder pan.
nice set up. compact. i used a scale and trickler many moons ago.
Good looking setup.
Facta non verba
Good job!
I run various powder measures depending on what powder I am dispensing and trickle to weight on a scale for most rifle loads.
I built and elevated mini-table for my mechanical scales and trickle to be operated from.
I do need to further elevate my RCBS trickler to gain a bit of clearance 9ver the scale pan however. A bit of weight and a little height.
Best regards
Three44s
Quote Originally Posted by Bret4207
“There is more to this than dumping lead in a hole.”
I did something similar except I used the 1/4” plate to mount a few other things to.
jmorris,
Thanks for sharing that video again. It's a timeless testament to American ingenuity!
I especially get a kick out of the "poop chute" that shifts your gun powder down and into your scale pan.
Three44s
Quote Originally Posted by Bret4207
“There is more to this than dumping lead in a hole.”
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote