About a month ago, I wrote regarding an M206 that seems to be having a timing problem. Occasionally (around every 3 cylinders), the cylinder doesn't lock up. It's a little scary, because it will actually drop the hammer and strike the primer--but about 1.5mm off center.
I explained the issue to RIA. They sent a shipping label, I returned it. I just got it back--and now I'm annoyed. They replaced the hammer spring (why? What would that have to do with the timing?). But the timing is still not right. It needs to advance the cylinder just a hair further.
I'm annoyed with this thing. I thought I'd be saving money, by buying a used but solid revolver like this. Cheap enough that I didn't have to sweat any wear or use. I got it for $240 which was a pretty good deal (I thought). Except now it's not even safe to use. So, since it isn't safe, I also can't sell it (not in good conscience at least).
Anyone have ideas what to do with this thing? Maybe a new cylinder or cylinder cog?
I need to contact them again. But they (RIA) require the shipping go through an FFL, which has already cost me $50.
Annoying. I try to never slam anyone on social media. But do yourself a favor, and if you find one of these walk away from it.
Annoyed.