I am wanting to make some .410 shot shells. If you have a few, say 50 or so and are not using them I would like to buy them.
Thanks
RED333
I am wanting to make some .410 shot shells. If you have a few, say 50 or so and are not using them I would like to buy them.
Thanks
RED333
Je suis Charlie
ΔΕΞΑΙ
Rednecks run the Brits out of this country years ago,
I will defend this country from anyone or thing that tries to take it from me or mine
I AM A REDNECK!!!
"If ever a time should come, when vain and aspiring men shall possess the highest seats in Government,our country will stand in need of its experienced patriots to prevent its ruin." Samuel Adams, 1776
I have some Magtech 410 brass I would sell but the 9.3 will serve as well with a little work.
Krieghoff is a good source for once fired brass in some chambering they use for regulation.
Haven’t bought from them before so on’t know about shipping or if they ship from the US.
https://www.krieghoff.com/product/on...ral-9-3-x-74r/
Graff & Sons had it in stock not long ago.
Thanks much, Huvius and Fitz.
Je suis Charlie
ΔΕΞΑΙ
Rednecks run the Brits out of this country years ago,
I will defend this country from anyone or thing that tries to take it from me or mine
I AM A REDNECK!!!
"If ever a time should come, when vain and aspiring men shall possess the highest seats in Government,our country will stand in need of its experienced patriots to prevent its ruin." Samuel Adams, 1776
Red333,
I don’t know where you are in this project now, but I would steer you toward the Magtech 410 brass as suggested by Huvius. It will be cheaper and doesn’t require all the work of reforming. I have some of their 12 and 20 ga brass and it’s good to go as is. I’ve worked with Norma 9.3x74R for recreating old BP cartridges and it’s good stuff, but for 410 it will just be a lot of extra work.
Just as a FYI, there was some aluminum cased stuff that used to show up at gun shows a while back. IIRC, the story was that it was from a military contract for survival guns for air crews. I don’t think it would hold up as well as brass for multiple reloads though. If you just want something for one time use, it might be worth a look.
Froggie
"It aint easy being green!"
I have found some 410 brass online. Thanks gentlemen.
Je suis Charlie
ΔΕΞΑΙ
Rednecks run the Brits out of this country years ago,
I will defend this country from anyone or thing that tries to take it from me or mine
I AM A REDNECK!!!
"If ever a time should come, when vain and aspiring men shall possess the highest seats in Government,our country will stand in need of its experienced patriots to prevent its ruin." Samuel Adams, 1776
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |