bullet sizing die holding "die"

[porthos]

i belive someone on this vendor list sells dies that hold a sizing die for push thru nose first. who is that?

[wv109323]

I believe that is NOE that also makes molds

[G W Wade]

I bought an adap;ter to use NOE sizer dies in my Star, Available from NOE GW

[firefly1957]

Back in the 1990's I bought one from the back of an American rifle man magazine today I have a mini lathe I make new bushings for it with .
I do both cast and Jacketed bullets in the die originally I ordered a .510 die for my Sharps and a .351" die for my Winchester model 1907 . The Sharp .510 die has never been used as a Lyman .509 die shoots fine in my .510" groove depth rifle and the .351" die sized at .349" so I lapped it up to .351" . The push though now .351" sizer worked great on all .367 jacketed bullets if I get it set at the very top of ram stroke and use a good lube. The sized bullets also shoot well in the old Win. 1907 .
Custom Lee push though die sizes are not a lot of extra money at least not the last time I looked .

[JonB_in_Glencoe]

I bought my "adaptor" die from theperfessor.

https://castboolits.gunloads.com/sho...yman-RCBS-Dies

[BLAHUT]

Lee has a push through die for the press.

[oley55]

i belive someone on this vendor list sells dies that hold a sizing die for push thru nose first. who is that?

The NOE sizers may be used nose or tail first. You buy the die set that holds the sizer bushings. Bushings are less than $12 bucks if I recall correctly. Pretty good deal IMO. I have multiple bushings for each of my desired calibers. The die/bushing holder kit is a one time $46, but currently out of stock. The whole deal is a more refined version of the older Lee push thru sizers.

https://noebulletmolds.com/site/shop...size-die-body/