Attaching a Mr. Bullet Feeder to a Lee APP? Anyone here done it?

[AbitNutz]

I know it's like a Ferrari towing a Hyundai but I've had great luck sizing bullets with my Lee APP.
I have a Mr. Bullet Feeder that I have hanging from a 3/4" black iron pipe instead of off my Dillon case feeder. Among other things, it makes it a lot easier to move. I'm going to bolt down another black iron pipe and mount it next near my Inline Fabrications Quick Change Mount. The idea is that I can slide in my Lee APP press that I size bullets with and instead of using tubes. I can easily move my MBF and use it.

At least that's the idea. I'm wondering if anyone has hooked up a Mr. Bullet Feeder to a Lee APP here? How did you make the connection? I was looking around and I didn't see anything obvious that other folks had done. Although, I know many have done it. It's not rocket surgery but I'd rather not do something worse if someone else has already done it better.

[deces]

There are files on the thingiverse, that allow you to adapt a single boolit feeder tube to Lee's universal feeder. It should work the same on the APP.

[Jhopson]

This may help. This guy attached his MR. bullet feeder to the Lee APP

https://youtu.be/dl0OpZc23Dg


Sent from my iPhone using Tapatalk

[Iron369]

There are adapters on eBay

[Ausglock]

This may help. This guy attached his MR. bullet feeder to the Lee APP

https://youtu.be/dl0OpZc23Dg


Sent from my iPhone using Tapatalk

G'day. The video is on my setup from a few years ago. I still use it as is, But have fitted a foot switch to start & stop the feeder.
I sized 3000 230gn 45 bullets on the weekend using this setup.

The nose down conversion from Mr. Buller feeder works great.