RotoMetals2MidSouth Shooters SupplyLee PrecisionRepackbox
Load DataReloading EverythingWidenersInline Fabrication
PBcastco Titan Reloading
Results 1 to 4 of 4

Thread: Plain Base Gas Check Maker

  1. #1
    Boolit Master


    cwlongshot's Avatar
    Join Date
    Jul 2012
    Location
    Central Connecticut
    Posts
    3,642

    Exclamation Plain Base Gas Check Maker

    Ran across this company in Florida.

    Matteson's Machine Shop.

    Some great folks making some neat stuff for bullet casters and reloaders.

    This is a PLAIN BASE Gas Check Maker. I made the switch to Powder coating a number of years back. So all my molds today are plain Based. Occasionally I feel a GC might be beneficial and wanted to try this unit.

    Its works very well a d gives me opertunity to have it "both ways".

    https://youtu.be/emwO9_o3_Tc

    CW
    NRA Life member REMEMBER, FREEDOM IS NOT FREE its being paid for in BLOOD.
    Come visit my RUMBLE & uTube page's !!

    https://www.RUMBLE.com/user/Cwlongshot
    https://youtube.com/channel/UCBOIIvlk30qD5a7xVLfmyfw

  2. #2
    Boolit Master

    Uncle Grinch's Avatar
    Join Date
    Jul 2005
    Location
    Middle Georgia
    Posts
    1,644
    Watched the video and this looks like an easy to use product. Thanks for the info!
    Shoot Safe,
    Mike

    Retired Telephone Man
    NRA Endowment Member
    Marion Road Gun Club
    ( www.marionroad.com )

  3. #3
    Boolit Master

    Idz's Avatar
    Join Date
    May 2013
    Location
    New Mexico
    Posts
    819
    Watched your video and saw a few things that might be the solution to ragged edges. If you look at my checkmaker design in the sticky you'll see there is a longer throat for the punch to align in the die body before it punches which ensures the disc isn't tilted when it hits the forming pin. Also the forming pin in the die body should be slightly below the slot so the disc is completely punched out before it begins to be formed. As you discovered the clearances between the punch and die are highly dependent on material type and thickness. The Machinerys Handbook has a whole section on designing punch and forming dies. Also you didn't mention it but there probably is a counterbore in the punch that acts as a stripper to pull the finished check off the forming pin. The check will spring open slightly and catch on the counterbore lip which is why its important to fully stroke the press.

    Good luck

  4. #4
    Boolit Buddy
    Join Date
    Jan 2021
    Posts
    240
    Does a gas check that crimps onto the base of a cast bullet affect accuracy compared to a gas check crimped onto a bullet that has the groove for one? I made plans to have a gas check groove cutter made for normal gas checks. Has anyone run across such a tool?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check