Hey folks. I made the leap and pulled the trigger on the XL750. I'm still in the process of mounting it to the bench and setting it up and making adjustments. It appears that I'm getting some rubbing/contact of the two parts in the attached photo. I'm not sure if there is an adjustment that can prevent contact. I have painters tape on the one part for now because it was starting to leave a mark in the metal. Might seem a bit minor but for a brand new machine I want it running without contact on these to parts. When I lift the ram it clears but it touches when lowering the ram. Is there an adjustment I'm missing?
Sent from my LYA-L0C using Tapatalk