32 S&W reloading things

[Life Member]

I need it all.

[Green Frog]

You need to be a little more specific. Do you want casting equipment, sizing/lubing or powder coat or commercial cast or jacketed? Do you have a press and need dies or both? Do you really want 32 S&W (“short”) or do you actually want 32 S&W Long? A general want list would be helpful.

Green Frog

[kentfielddude]

I have a RCBS part no. 82056 2 cavity mold. 84 grain wadcutter .32 caliber that I'll sell. Not sure if it will work for 32s&W.

[Green Frog]

Apparently Life Member wasn’t really interested or forgot he posted here. If you’re reading this LM, let us know if you’re still interested and be a little more specific about what you want to accomplish.
Froggie

[Life Member]

Need brass bullets standard die set. S&W long for top brake S&W's

[Green Frog]

Good LM, now we can help. I can probably find a hundred or so cast bullets on the heavy side of what most of us shoot, say 95-100 gr. My 32 S&W L brass is all used and I don’t have a huge amount of it, but I might be able to spare a box of 50. Send me a PM and we can work something out to get you started.
I see die sets all over… a set was advertised here in the last two weeks and they show up frequently on eBay. Remember, the same die sets are usually suitable for 32 S&W L and 32 H&R, so you might widen your search. You might go up to the dashboard at the top of the page and click on “Communities” then “32 Retinue” to find some kindred souls.
Froggie

[rockrat]

And I think 32 acp dies will work also.

[challenger_i]

PM sent