It sure looks like a good cartridge despite the rareness. It would be great in a Krag if it would fit in the magazine.
Sent from my iPhone using Tapatalk
It sure looks like a good cartridge despite the rareness. It would be great in a Krag if it would fit in the magazine.
Sent from my iPhone using Tapatalk
IIRC there is wildcat called 35 Krag, the Krag case necked up to take .358 bullets. The Krag case is very close in rim diameter and thickness and could be expanded and fire formed for use, although short. Seat bullets to the 35 WCF OAL, Crimping might be an issue but may not be needed in the Win 95 magazine.
You are correct, Rich. Using Krag brass is one alternative and astutely you are correct, they are a bit short but reportedly quite workable. 405Win is another alternative although about as common as 35Win, so not much love there. I am hearing 7x65R is another alternative.....very much interested in pursuing this route at the moment.
Thanks all for the great feedback. Love this place!!
"Do not follow where the path might lead, go instead where there is no path and leave a trail" Ralph Waldo Emerson
What lies behind us and what lies before us are tiny matters compared to what lies within us.
- Henry S. Haskins in “Meditations in Wall Street”
"Political correctness is a doctrine, fostered by a delusional, illogical minority, and rapidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end." ...Unknown
As mentioned before, if all else fails you can always size 30-40 Krag brass down to make 35 WCF. This place reports to have some 30-40 brass in stock. https://topfirearmssupplies.com/30-4...raf-son-brass/
Currently looking for a Lyman/Ideal 311419 Mold - PM if you have one you'd like to get rid of!
JDGabbard's Feedback Thread
"A hand on a gun is better than a cop on the phone," Jerry Ellis, Oklahoma State House of Representatives.
The neighbors refer to me affectionately as, "The nut up on the ridge with the cannon." - MaxHeadSpace.
Jdgabbard's very own boolit boxes pattern!
Thanks jd....I've got a good store of krag brass and that's an option for me. I do appreciate you jumping in with other potential options!
"Do not follow where the path might lead, go instead where there is no path and leave a trail" Ralph Waldo Emerson
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |