Reloading EverythingRepackboxRotoMetals2Wideners
MidSouth Shooters SupplyLee PrecisionLoad DataInline Fabrication
Titan Reloading
Results 1 to 20 of 20

Thread: Die makers. Who makes their own.

  1. #1
    Boolit Bub
    Join Date
    Dec 2020
    Posts
    52

    Die makers. Who makes their own.

    Who makes their own dies? And is willing to help beginner /hobbie machinest.

  2. #2
    Boolit Grand Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    14,457
    What dies are you wanting to make? I was a tool and die maker for 30 years.
    Where are you located at?

  3. #3
    Boolit Buddy

    Join Date
    Aug 2019
    Location
    Tavernier, FL Fredericktown, PA
    Posts
    455
    I made dies for my 41 Swiss Vetterli. Converted the old dawg to centerfire. Reamed the neck of the chamber to accept groove diameter .446 340gr cast boolits. My dies reform 348 Winchester. Great shooter! Even shot Bambi a couple of years ago!

  4. #4
    Boolit Bub
    Join Date
    Dec 2020
    Posts
    52
    I'm in Wyoming. I'm wanting to use spent 9mm, 40s&w, and .223 into bullets I can use. Same as BTsnipers or C/H one shot dies to start. Maybe .380 as well. This seems simple to make a punch to seat the core and one to release it. I have purchased PTG blank dies and have grade 8 bolts to make the body out of. I need info. on making the cutter/reamer. and how to polish the body.

  5. #5
    Frosted Boolits

    IllinoisCoyoteHunter's Avatar
    Join Date
    Feb 2009
    Location
    Eureka, MO
    Posts
    1,808
    Best bet would be to tell us what machinery you have to work with, then you will most likely get some ways to attack it.
    My Feedback : http://castboolits.gunloads.com/show...iscoyotehunter

    An armed society is a polite society.

    the BB knows

  6. #6
    Boolit Master Moleman-'s Avatar
    Join Date
    Jul 2016
    Location
    SW Michigan next to a corn field
    Posts
    1,291
    Haven't made swaging dies yet, but interested.
    Last edited by Moleman-; 02-26-2023 at 02:02 PM.

  7. #7
    Frosted Boolits

    IllinoisCoyoteHunter's Avatar
    Join Date
    Feb 2009
    Location
    Eureka, MO
    Posts
    1,808
    I think the OP is talking about bullet swaging dies, not reloading dies.
    My Feedback : http://castboolits.gunloads.com/show...iscoyotehunter

    An armed society is a polite society.

    the BB knows

  8. #8
    Boolit Bub
    Join Date
    Dec 2020
    Posts
    52
    Yes about bullet swaging dies. I have a precision mathews pm727m mill and a bolton 12 x 30 lathe. This is my home set up. I'm an I&E tech by trade. So I wired a friend of mines CNC machine shop that lets me play around on his equipment when not in use. I have yet to do this.

  9. #9
    Boolit Master super6's Avatar
    Join Date
    Jun 2013
    Location
    S.C
    Posts
    558
    Any dies you make will require different machining skills, Most will start with heat treatable steel, If you are working with this type of steel and plan to harden than plan to polish, It will be different than mild steel. I heat treat and polish with compounds, Other wise wet and dry paper and a wheel, cotton with brake in paste. Do you know how to heat treat? I am just trying to follow what your trying to accomplish
    Give me something to believe in. Poison
    Arosmith What it takes
    A 12 step program

  10. #10
    Boolit Grand Master

    Join Date
    Mar 2013
    Location
    Northwest Ohio
    Posts
    14,457
    also not every grade of tool steel is as "usable" for dies There are some air hardening that actually will shirk slightly when hardened meaning you can machine to size harden and have a few thousandths to polish out to size from the hardening process. Another is when hardening you need to anneal or draw the part back some to avoid it being brittle.

  11. #11
    Boolit Master super6's Avatar
    Join Date
    Jun 2013
    Location
    S.C
    Posts
    558
    A1 Will not require a draw back and will last for ever. Just not brittle. It is a be ouch to machine tho.
    Give me something to believe in. Poison
    Arosmith What it takes
    A 12 step program

  12. #12
    Frosted Boolits

    IllinoisCoyoteHunter's Avatar
    Join Date
    Feb 2009
    Location
    Eureka, MO
    Posts
    1,808
    A2 and A6 took steels are very dimensionally stable during heat treat, if they are done properly in a vacuum furnace. O1 and 06 are less dimensionally stable during the heat treat process but are much easier to get “right” in the home shop. O6 is, in my opinion, the best swage die material you can use. If you are unfamiliar with it, do some research on it.

    Realistically, for what we do, any tool steel heat treated properly and drawn properly will work fine. Some are better than others but whatever you can get your hands on you should use.
    My Feedback : http://castboolits.gunloads.com/show...iscoyotehunter

    An armed society is a polite society.

    the BB knows

  13. #13
    Boolit Master
    Join Date
    Nov 2017
    Location
    brisbane ,qld,australia
    Posts
    2,125
    Forget about using bolts .....the majority are Chinese junk ,very hard to machine ,and of uncertain heat treat.

  14. #14
    Frosted Boolits

    IllinoisCoyoteHunter's Avatar
    Join Date
    Feb 2009
    Location
    Eureka, MO
    Posts
    1,808
    For punches I exclusively use 1144 stressproof. Machines great and is up to the task. Plus there is no heat treating involved.
    My Feedback : http://castboolits.gunloads.com/show...iscoyotehunter

    An armed society is a polite society.

    the BB knows

  15. #15
    Boolit Master
    Join Date
    Jan 2016
    Posts
    995
    GONRA agrees with john.k FORGET !@#$ BOLTS!
    Make it EZ - get documented material (drill rod etc.) from actual industrial suppliers.....
    >>> NO HEAT TREATNG GUESS VERK! !! <<<<

  16. #16
    Boolit Buddy
    Join Date
    Apr 2022
    Location
    SW Washington
    Posts
    142
    What does PGE stand for? As in PGE blank dies?

  17. #17
    Frosted Boolits

    IllinoisCoyoteHunter's Avatar
    Join Date
    Feb 2009
    Location
    Eureka, MO
    Posts
    1,808
    PTG = Pacific Tool and Gauge
    My Feedback : http://castboolits.gunloads.com/show...iscoyotehunter

    An armed society is a polite society.

    the BB knows

  18. #18
    Boolit Buddy
    Join Date
    Apr 2022
    Location
    SW Washington
    Posts
    142
    Thank you.

  19. #19
    Boolit Master


    Join Date
    Sep 2007
    Location
    East Texas
    Posts
    3,624
    I have made a couple of Swage dies for my Herters 9 ton press.
    They are simple for hand gun bullets.
    Rifle bullet Swage dies are more complicated and take much more time.

  20. #20
    Boolit Buddy
    Join Date
    Dec 2009
    Location
    Gorham Maine
    Posts
    499
    Quote Originally Posted by IllinoisCoyoteHunter View Post
    For punches I exclusively use 1144 stressproof. Machines great and is up to the task. Plus there is no heat treating involved.
    Thanks for the tip, I just ordered some 1144 to try. Need to spend some time at the lathe making punches for the different projects going.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check