I recently ended up with a Lee Loader in .38 Special. Everything is there and complete except for the Instruction/Load information. Could someone who has that info please send me a copy via P.M. Thanks.
I recently ended up with a Lee Loader in .38 Special. Everything is there and complete except for the Instruction/Load information. Could someone who has that info please send me a copy via P.M. Thanks.
NRA Life 1992
My avatar is almost a dead ringer for my little buddy Chico. Six pounds of mean that thought he was a Pit Bull. Miss that little guy.
looking... I may have it...
I did think it is available online... Google Can Be your friend..
Remember the Law of Probability - The probability of being watched is directly proportional to the stupidity of your act.
I started reloading in 1969 with a 38 Special Lee Loader. My only addition was a scale, beam not digital. One consideration is priming. Make sure the priming base is clean and the plate free moving. I like Lee Loaders and still have 7...
My Anchor is holding fast!
Its nice to have instructions, But those things are kind of intuitive. Lee made em simple. The dipper's still work for me.
“You should tell someone what you know. There should be a history, so that men can learn from it.
He smiled. “Men do not learn from history. Each generation believes itself brighter than the last, each believes it can survive the mistakes of the older ones. Each discovers each old thing and they throw up their hands and say ‘See! Look what I have found! Look upon what I know!’ And each believes it is something new.
Louis L’Amour
The Californios
We will need more info to be able to help. Is your Lee Loader in a cardboard box, a 2 piece red plastic box, a 1 piece red plastic box. Also what color are the powder scoops. I have data for one of the early ones but it has a metal powder scoop, made only in 1963. Lee's site has most of the powder charts ( except the 6.5x55 swede) and the loading instructions are the same on all years. james
Thanks for the info folks, I appreciate it.
Better late than never info: Red and black cardboard box with styrofoam insert, black plastic scoop.
NRA Life 1992
My avatar is almost a dead ringer for my little buddy Chico. Six pounds of mean that thought he was a Pit Bull. Miss that little guy.
I used to hang out on the Lee-loader.com forum (yes you haters, there is such a place!) and they have lots of good stuff posted there including a bunch of the data cards, both older and more recent. I can’t remember whether they had the instruction sheet on or not, but i know the old and new data cards are there... I posted them. If you can’t find an instruction sheet, PM me with your email address and I’ll send you a scan of one of mine. BTW, as the original Lee Custom broke up, the last of the sets in the old black and red cardboard boxed set came with a neat red plastic hand priming tool that eliminated the objectionable whack BOOM priming procedure that many careless reloaders experienced and complained about.
Froggie
"It aint easy being green!"
Yes... the last one I purchased...was in a plastic box, and had a pretty darn good hand primer... I still use it for onesy, twosy's
One thing I vividly recall... Do Not inadvertently use the decapper and try to seat primers!!! Stuck that sucker in the ceiling pretty good...LOL
Doing it By the Book...I never had a moments problem...but was "gun shy" for a time...LOL
PM'ed you froggie. Thank you.
NRA Life 1992
My avatar is almost a dead ringer for my little buddy Chico. Six pounds of mean that thought he was a Pit Bull. Miss that little guy.
My 38 special and 270 are red box. I was just starting out but was real uncomfortable priming. I bought a Lee primer with round tray and a set of yellow scoops around 1980. Still using same priming tool.
I didn't know about Lee loader site, something else to check out. To
I still drop by the Lee Loader forum a few times each week. Lots of good, unbiased information and sharing...
http://www.lee-loader.com/index.php
My Anchor is holding fast!
The danger of decapping live primers is somewhat overstated IMO. Just be gentle and let the primer get pushed out. Remember, it's the impact that sets them off! Over the years I've probably removed and reused a couple of dozen or more.
Then again, maybe I've just been lucky... you have to decide for yourself what that primer is worth to you if you salvage it.
Froggie
"It aint easy being green!"
I have to agree with the Green Frog, depriming live primers is not a problem if done right. A wooden mallet, or leather mallet and light taps will do the job without setting a primer off. Just be sure to set your depriming shell holder on a wooden block ; I use a cut section of 2x4 for that. I have deprimed well over 200 hundred primed case of different calibers and have only set one or two off and that was many years ago when I first started reloading with a Lee Loader. The 2 I set off were in the priming process and not depriming. My expereince anyway, james
As Mr. Frog and Mr. Sailor mentioned, removing "live" primers is completely safe, if common sense is used. When I had been reloading just a few weeks I took apart a primer to see how it works. Obviously a sharp blow to the cup will crush the compound between the cup and anvil, igniting the compound (convincing me that primers needed to be seated all the way to the bottom of the pocket, solidly supporting the anvil). Pushing a primer out from the case does not provide the blow necessary to crush and ignite the compound...
My Anchor is holding fast!
I have a Lee Loader in .38. For the life of me, I have not been able to load CB's, and not have a little shaving of lead come off during seating. For my purposes it's not that big of a deal (I'm loading for a .38 snubby, shooting at close range). Still, I've not been able to figure out why it's doing that! If you gain some skills with using it, please share them.
Too much of a good thing is an awesome thing!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |