Need help; Outers Foul Out solution.

[contender1]

I had a buddy call me asking if I knew of a home made liquid solution that can be mixed to use in the old Outers Foul Out electronic cleaning system. Specifically, the lead out solution.
I know I've seen it "somewhere" but can't recall.

Anybody know what to mix to make the solution?

[Rapier]

I use plain old hardware store ammonia and distilled water, hooked up to DC electroplate the rod. I made my own 25 cent foul out. The Ammonia does the job in a couple minutes, usually, unless you have some real crud. Might need to clean the electrolisis rod off and repeat.I get "shot out" barrel in frequently.
I also use the Shooters Choice Copper Solvent in a 7 day soak
Use a chamber plug then fill the bore, after you remove the wood.

[45workhorse]

http://www.frfrogspad.com/homemade.htm

You might find what you are looking for at the above site.

[45workhorse]

https://castboolits.gunloads.com/sho...c-bore-cleaner

Another link

[45_Colt]

Here you go, please skip anything with ammonia and/or vinegar in it. From this thread:

https://castboolits.gunloads.com/sho...om-bores/page6

Copper Solution

562.3 grains Ammonium Acetate
51.3 grains Copper Acetate or 58.3 grains Cupric Acetate Monohydrate
Add distilled (or high megohm deionized) water to make 1 Qt.

Lead Solution

562.3 grains Ammonium Acetate
95.0 grains Lead Acetate or 110.8 grains of Lead Acetate Trihydrate
Add distilled (or high megohm deionized) water to make 1 Qt.

45_Colt

[contender1]

Thanks all.

Now the fun question.

Where can I get Ammonium Acetate and Lead Acetate or Lead Acetate Trihydrate?
What the heck are the "common" terms for such stuff, & where are the places I can buy such stuff?
Ace Hardware maybe?

[BLAHUT]

I use boreteck eliminator, will not hurt the barrel and will soak out all lead and copper or brass. I gave up on the electrolysis, either just wet patch and let soak for 5 minutes, use a plastic jag, or plug the barrel and let soak over night, remove from wood first.

[45_Colt]

Thanks all.

Now the fun question.

Where can I get Ammonium Acetate and Lead Acetate or Lead Acetate Trihydrate?
What the heck are the "common" terms for such stuff, & where are the places I can buy such stuff?
Ace Hardware maybe?

Chemical/science supply companies. Here are two a quick search brought up:

https://www.laballey.com/products/lead-acetate-lab
https://www.sciencecompany.com/Lead-...ate-100g-P6385

45_Colt

[Sasquatch-1]

Tell him to try 100% copper Chore-Boy on an old bore brush with a patch under the Chore-Boy. Wrap a couple of strands around the patch. He may have to replace the Chore-Boy after one or two swipes.

[contender1]

Thanks 45_Colt. I'll pass this along.

I told him already about 100% copper Chore Boy,, as well as the "Lewis Lead Remover." But he has the Outers & wants to keep using it.

[upr45]

I have a Foul out but haven't used it in years. I think the foaming bore cleaners are way better. Foaming cleaners don't attack bluing like electrolysis can if have impurities.