RepackboxMidSouth Shooters SupplyLee PrecisionWideners
Inline Fabrication

Page 2 of 2 FirstFirst 12
Results 21 to 23 of 23

Thread: Polymer coatings, wet versa dry.

  1. #21
    Boolit Master elmacgyver0's Avatar
    Join Date
    Nov 2010
    Posts
    1,292
    That is nice to know.
    I guess I was not too clear in what I did and why I did it.
    I will be most happy to give the Hi-Tek coating a try.
    I am kind of a tinkerdink and enjoy messing with things.
    I was already an Eastwood customer as I buy some of my welding supplies from them, not to mention the TIG welder I got from my wife for Christmas a few years back.
    So that is why I went with the Eastwood powder.
    If I just google Hi-Tek will I find where to order it?

  2. #22
    Boolit Buddy FWest's Avatar
    Join Date
    Dec 2010
    Location
    Maine
    Posts
    234
    https://hi-performancebulletcoatings...ercoat-powder/

    This is where I ordered from. Not sure if it’s the only or least expensive place but was delivered within a week.

  3. #23
    Boolit Master




    HI-TEK's Avatar
    Join Date
    Aug 2012
    Location
    Australia
    Posts
    2,131
    Quote Originally Posted by elmacgyver0 View Post
    That is nice to know.
    I guess I was not too clear in what I did and why I did it.
    I will be most happy to give the Hi-Tek coating a try.
    I am kind of a tinkerdink and enjoy messing with things.
    I was already an Eastwood customer as I buy some of my welding supplies from them, not to mention the TIG welder I got from my wife for Christmas a few years back.
    So that is why I went with the Eastwood powder.
    If I just google Hi-Tek will I find where to order it?


    Depending on your location, in USA products are available from Hi-Performance Bullet coatings. They have an online store.

    With tinkering, I am a long standing tinkerer, and always busy with something either useful or useless afterwards.

    I purchased a ride on mower for the wife, a late Christmas present, as I was concerned about the cutting of grass in our hot weather with a push mower.

    It is hoped. that the TIG welder was appreciated.

    I find it very strange, that in US, powder coat is sold in small quantities to any customer and no apparent regulations being in place. In Aus., there is a very tightly controlled situation by work cover, who monitors use of Powder Coating use, as it is used in commercial applications, the people and area where it is used, is tightly controlled for health and safety.
    Operators spraying parts via Electrostatic applicators have to be wearing protective gear, a totally enclosed outfit with fresh air supply from outside work area . The whole coating area is sealed and exhausted through air filtration with external dust collection filter bags. In industrial use, there is a huge volume of powder coat that is applied, and workers have to be adequately protected.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check