.360 Buckhammer

[Texas by God]

So- it’s oval shaped inside?


Sent from my iPhone using Tapatalk

[Beerd]

Also, keep in mind that does not appear to be the SAAMI drawing (which would also include a chamber drawing). It may be an early "concept" drawing and just shows the taper continuing to the case mouth.

I looked at the SAMMI site and there doesn't appear to be a drawing for the 360 yet.

correct, the drawing in my previous post #54 was from the one in Outdoor Life.
..

[Good Cheer]

Might make a nice black powder target round as well.

[Tripplebeards]

To me it’s just a straight wall 35 Rem. I’ll stick with my 35 Rems. Hopefully this gets manufactures to make a few more .358/.360 options.

[NSB]

To me it’s just a straight wall 35 Rem. I’ll stick with my 35 Rems. Hopefully this gets manufactures to make a few more .358/.360 options.

Pretty much it in a nutshell.

[barnetmill]

Pretty much it in a nutshell.

It is a straight wall 35 remington that is legal under specialized hunt circumstance where .35 remington is not.

[cwlongshot]

It is a straight wall 35 remington that is legal under specialized hunt circumstance where .35 remington is not.

100% and THATS THE DIFFERENCE!!

[Tripplebeards]

Yep if I was in one of those states I’d be excited about it…but I’m not. I use to hunt iowa and they went from shotgun only to straight wall…and then adding various bottle neck cartridges along the way every year. Don’t know why they even have stipulations any more. It probably would be fun in an AR configuration even though I’m not an AR guy. I have a few but never shoot them. Hopefully manufactures will start getting up there butt and start putting out more jacketed offerings in .358 because of this. It’s always impossible to find a .358 bullet on the shelf somewhere. Maybe at least they’ll be some light at the end of the tunnel for 35 Cal shooters for bulk projectiles because of this.