So, I致e been casting for years. I only recently dove into the powder coating game. Although I took my time acquiring the necessary items to do it. That said, I recently was successful in powder coating and sizing some 9mm and 38spl boolits. And decided to see how they performed.
The only load I shot so far was the 358311 over 4.2gr of Unique. This has often proved to be an accurate load for me, although a very dirty load -usually gums up the gun with soot mixed with lube. I took a box to the range with me today while I was testing out a new rifle. I decided that I壇 put these through my SP-101. And let me tell you, not only were they just as accurate as any others I致e loaded, but the gun is a good bit cleaner. Although there is certain some carbon on it, it痴 otherwise clean from what I can tell.
This sold me. I知 not going back to lube so long as I can find appropriate powder.