RepackboxInline FabricationTitan ReloadingLoad Data
RotoMetals2WidenersMidSouth Shooters SupplyReloading Everything
Lee Precision
Results 1 to 3 of 3

Thread: noe mold for 300blk, loading advice needed

  1. #1
    Boolit Buddy
    Join Date
    Dec 2012
    Location
    ohio
    Posts
    127

    noe mold for 300blk, loading advice needed

    I just picked up a HTC310-225-RN-CE4 5 Cavity PB for 300 blk, and love it, what col have you guys been running, it seems like the bullet wants to be seated fairly deep. And how have you guys been crimping, i have a lee set of dies. I just got the mold broke in and use hitek and h110, and the gun is an ar15 with 16" barrel pistol gas. Any good starting point would be appreciated as this is my first time with semiauto and cast. This mold really seems like a winner.

  2. #2
    Boolit Buddy
    Join Date
    Jan 2020
    Posts
    204
    You may not have to crimp I don't use that particular mould but do use several other I seat just deep enough to fit in the mag and size the nose to just slightly engrave the riflings. just make sure you can eject the round if need be without pulling the bullet.

  3. #3
    Boolit Buddy
    Join Date
    Dec 2012
    Location
    ohio
    Posts
    127
    fitz, i made a split cast today and if i load the rounds to 2.26 they are about 10 thousands off the lands, any powder recommendations i have heard 1680 is ideal for subs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check